VITEK VT-1508 - Инструкция по эксплуатации - Страница 7

7

ENGLISH          

10. 

Remove  the  tip  (5)  from  the  cappuccinator 
pipe  (4)  and  put  a  suitable  bowl  under  the 
pipe  (4).  Press  the  button  (9)  “

”  and  wait 

until  the  boiler  heats  up  (the  red  light  indi-
cator  will  glow  constantly).  Slowly  turn  the 
steam  supply  control  knob  (3)  «OFF---  +» 
and  switch  the  steam  supply  on  for 
10-15  seconds.  Switch  the  steam  supply  off 
by  setting  the  control  knob  (3)  to  the  posi-
tion «OFF».

11. 

Repeat  the  procedure  described  in  steps 
7-10 not less than 3 times. Switch the coffee 
maker off by pressing the button (13). Wait for 
10-15 minutes.

12. 

Switch  the  coffee  maker  on  by  pressing  the 
button (13) «

».

13. 

Wait  until  the  blue  light  indicator  glows  con-
stantly.

14. 

With small intervals, repeat the boiler cleaning 
procedure (clause 9) until the citric acid solu-
tion dissolves in the water tank completely.

15. 

Fill  the  water  tank  (2)  with  clear  water  and 
repeat the clauses 7-10 not less than 3 times 
without the 10-15 minute break.

16. 

Switch  the  coffee  maker  off  by  pressing  the 
button (13) «

».

Notes: 

- To remove the scale you can use spe-

cial descaling agents for coffee makers and cof-
fee  machines,  strictly  following  the  instructions 
on their usage.

CLEANING

– 

If  during  the  filter  (15)  cleaning  you  find  out 
that the openings are blocked with the ground 
coffee  remnants,  you  can  clean  them  with  a 
small brush.

– 

Clean  the  coffee  maker  body  with  a  soft, 
slightly damp cloth and then wipe it dry.

– 

Do  not  use  metal  brushes  or  abrasives  to 
clean the coffee maker.

– 

Do  not  immerse  the  power  cord,  the  power 
plug and the coffee maker body into water or 
other liquids.

– 

Wash the removable parts of the coffee maker 
(3,  6,  7,  15,  16)  with  warm  water  and  neutral 
detergent, rinse them and dry.

Drip tray and grid (6)

– 

Remove the grid (6) from the tray, remove the 
tray and pour out water, wash the tray and put 
it back to its place, put the grid (6) on the tray.

STORAGE

– 

Before  taking  the  unit  away  for  storage, 
unplug  it  and  let  the  unit  cool  down  com-
pletely.

– 

Clean the unit.

– 

Do  not  leave  and  keep  the  coffee  maker  in 
places with the temperature below 0°C.

– 

Keep  the  unit  in  a  dry  cool  place  away  from 
children and disabled persons.

TROUBLES AND TROUBLESHOOTING

Problem

Cause

Solution

The unit can’t be 
switched on

No voltage in the mains socket.
The power plug is not completely 
inserted into the socket.

Make sure that the plug is operating.
Check whether the plug is completely 
inserted into the socket.

Water leaks from the 
lower part of the unit.

The water tray is full.

Pour out water from the tray.

Coffee leakage from 
the filter holder

Loose connection of the filter and 
boiler gasket, ground coffee got 
on the edges of the filter.

Clean the edges of the filter.

Coffee 
has a foreign smell

Wrong process of scale removal 
in the boiler.

Improper storage of coffee.

See the chapters “Before using the 
unit”, “Descaling” and perform them  
several times.
Use fresh ground coffee. 
Keep coffee in a dry cool place.

Steam doesn‘t froth 
milk

Low temperature of outgoing 
steam.
The bowl is too big or of improper 
size.
You used skimmed milk.

Froth milk only after the ready indicator  
lights up.
Use narrow high container  for frothed 
milk.
Use only whole milk with fat content 
4-6%.

IM VT-1508.indd   7

28.05.2019   14:43:55