BRAYER BR1109 - Инструкция по эксплуатации - Страница 16

16

EN

• 

The outgoing steam creates whirls which froths milk; 

from time to time lift and lower the bowl with milk 

against the tip (7) to make the milk foam.

• 

Making the milk foam is an art. You may not make it 

at the first try, don’t worry and experiment until you 

achieve good results.

• 

When you froth milk, you can remove the tip (5) 

and try frothing milk directly with the steam from the 

cappuccinator pipe (6).

• 

Close the steam supply by turning the knob (7) «

» 

clockwise until bumping.

• 

Switch the steam supply off by pressing the steam 

supply button (24) «STEAM PREHEAT» again.

• 

Add frothed milk to the ready espresso, and the 

cappuccino is ready. You can decorate the milk foam 

with confectionery sugar and cocoa powder.

• 

Right after making frothed milk clean the tip (5) - to 

do this, put the tip (5) into a glass of water, switch the 

steam supply on by pressing the button (24) «STEAM 

PREHEAT» and turn the steam supply knob (7) «

» counterclockwise to release some steam. After that 

close the steam supply by turning the knob (7) «

» 

clockwise until bumping and switch the steam supply 

off by pressing the steam supply button (24) «STEAM 

PREHEAT».

• 

Switch the coffee maker off by pressing the button (23) 

«ON».

• 

Wait until the coffee maker cools down and remove 

the tip (5) from the cappuccinator pipe (6), wipe the 

cappuccinator pipe (46) with a soft damp cloth and wash 

the tip (5) under a water jet.

Notes: 

- if you want to make espresso right after making 

cappuccino, you need to reduce the water temperature 

in the boiler; 

- place an empty cup on the grid (2). If the filter holder 

(4) and the filter (21) are not installed, install the filter 

holder (4) into the coffee maker, do not add ground 

coffee in the filter (21);

- install the filter holder (4) in the coffee maker, the filter 

holder (4) ledges should match the grooves on the 

boiler. After that turn the filter holder (4) handle (3) to 

the right until bumping;

- switch the water supply on by pressing the button (26) 

«

», if necessary, press the button (26) «

» 

again. The coffee maker is ready to make espresso.

- to reduce the temperature of the water in the coffee 

maker boiler, after making the cappuccino you can 

pause for 5-10 minutes, which is necessary to cool the 

water in the coffee maker boiler.

WARMING THE DRINKS

• 

You can warm up ready drinks by putting the 

cappuccinator pipe (6) without the tip (5) into the cup with 

the drink.

• 

If the filter holder (4) and the filter (21) are not installed, 

install the filter holder into the coffee maker. Do not add 

ground coffee in the filter (21).