BRAYER BR1109 - Инструкция по эксплуатации - Страница 10

10

EN

be flashing. One segment « » of the coffee brewing 

strength symbol will glow constantly.

• 

Current time digital symbols (32) «12:00» and the 

symbol (34) «CLOCK» will be flashing for 5 seconds, 

and you can set the current time. 

• 

Set the current time in «hours» by pressing the 

button (28) «HOURS». The time format is 12 hours. 

The symbols (31) show the current time before noon 

«AM» and after noon «PM».

• 

Set the current time in «minutes» by pressing the 

button (27) «MINUTES». The digital symbols (32) will 

show the current time.

• 

 After setting the current time, the coffee maker will 

return to standby mode, while the display will show 

the current time (32), the symbol (31) «AM or PM» 
and the coffee brewing strength symbol «

».

MAKING COFFEE IN THE DRIP COFFEE MAKER

• 

Open the lid (12) of the water tank (15) of the drip 

coffee maker and fill the tank with drinking water. Do 

not exceed the maximal water level mark! Close the 

lid (12).

• 

Open the lid (11) and install the reusable filter (13) 

in the filter holder (14). The drip coffee maker is 

intended for making 10 cups of coffee. For this, you’ll 

need about 60 g of ground coffee.

• 

Measure the required amount of ground coffee and 

put it into the filter (13). 6 grams of ground coffee 

per one coffee cup is required on average; adjust the 

quantity according to your taste.

• 

Make sure that the filter holder (14) is installed properly, 

otherwise the lid (11) will not close.

• 

Close the lid (11).

• 

Place the flask (18) on the tray (20), make sure that the 

center of the flask (18) lid matches the anti-drip valve.

• 

Plug the unit in. You will hear a sound signal, and for 

2 seconds all symbols will appear on the display. After 

that the symbol (34) «CLOCK» will start flashing, the 

symbol (31) «AM» will appear, the digital symbols (32) 

will show the time «12:00». The separating dots (33) will 
be flashing. One segment « » of the coffee brewing 

strength symbol will glow constantly. If necessary, you 

can set the current time (see the chapter «CURRENT 

TIME SETTING»).

• 

To switch the coffee maker on, press the button (30) 

«COFFEE ON/OFF», the button (30) will light up, the 

coffee maker will be switched on and the ready coffee will 

flow into the flask (18).

ATTENTION! 

Water passes through ground coffee under 

steam pressure, so do not bend over the coffee maker, do 

not open the lid (11) and do not remove the filter (13) or the 

filter holder (14).
Note: - during thew coffee maker operation only the button 

(30) «COFFEE ON/OFF» is active.

• 

When coffee is ready, you will hear 3 sound signals, the 

coffee maker will switch to the keep warm mode, the