BRAYER BR1109 - Инструкция по эксплуатации - Страница 13

13

EN

• 

Insert one of the coffee filters (21) into the holder (4), do 

not add ground coffee into the filter (21). 

• 

Install the filter holder (4) into the coffee maker. The 

filter holder (4) ledges should match the grooves on the 

boiler. After that turn the filter holder (4) handle (3) to 

the right until bumping.

• 

Place the cup on the tray grid (2).

• 

Plug the unit in. You will hear a sound signal, and for 

2 seconds all symbols will appear on the display. After 

that the symbol (34) «CLOCK» will start flashing, the 

symbol (31) «AM» will appear, the digital symbols 

(32) will show the time «12:00». The separating 
dots (33) will be flashing. One segment « » of the 

coffee brewing strength symbol will glow constantly. 

If necessary, you can set the current time (see the 

chapter «CURRENT TIME SETTING»).

• 

To switch the espresso coffee maker on, press the 

button (23) «ON», the button (23) «ON» and (24) 

«STEAM PREHEAT» indicators will glow constantly, 

and the button (25) « » and (26) «

» indicators 

will be flashing.

• 

After preheating the button (25) « » and (26) «

» 

indicators will glow constantly.

• 

Press the button (26) « », the button (26) «

» 

lighting will light up and start flashing, the water will be 

pouring into the cup. Depending on the capacity of the 

cup, press the button (26) « « several times. 

• 

Switch the coffee maker off by pressing the button 

(23) «ON», remove the full cup from the tray (2) grid 

and pour the water out. The coffee maker is ready for 

operation.

• 

Always switch the coffee maker off and unplug it when you 

don’t use it.

MAKING ESPRESSO

How to make good espresso

- Use ground coffee for espresso coffee makers.

- Slightly tamp the ground coffee in the filter (21), you can 

do it with the back side of the measuring spoon (22).

- Coffee strength depends on the quality and grinding 

degree of coffee beans. If coffee is pouring out too long, 

this means the coffee powder is too fine or it is tamped 

too strongly.

• 

Make sure that the steam supply is closed. To do this turn 

the knob (7) « » clockwise until bumping.

• 

Open the lid (10) of the water tank (9) and fill the tank (9) 

with cold water up to maximal level.

• 

Insert one of the coffee filters (21) into the holder (4) and 

add ground coffee in the filter (21) with the measuring 

spoon (22). Slightly tamp the ground coffee with the back 

side of the measuring spoon (22).

• 

To make one cup of espresso use the small filter (21) and 

press the button (25) « ». To make double portion of 

espresso use the big filter (21) and press the button (26) 

«

».

• 

Install the filter holder (4) into the coffee maker. The filter 

holder (4) ledges should match the grooves on the boiler.