Melitta Caffeo CI - Инструкция по эксплуатации - Страница 39

37

ENGLISH

Warning!

The descaling agent can cause skin irritations

Comply with the safety instructions and the dosing information specified on the 

descaling agent packaging.

8  Reinsert the water tank.
9  Place a vessel with a capacity of about 0.7 l or 

the coffee grounds container under the outlet and 

press the rotary switch to continue.

10  Connect the tube to the drip tray and to the outlet 

(Fig. 

D

) and press the rotary switch to confirm.

→

The integrated descaling programme is continued. 
This stage takes approximately 20 minutes. Water 

flows out of the outlet as well as in the interior of 

the appliance and into the drip tray through the 
tube. The prompt 

Empty container and tray 

then 

appears on the graphic display

.

11  Remove the tube from the drip tray.
12  Empty the drip tray and the coffee grounds 

container and then reinsert them.

13  Reconnect the tube to the the drip tray and 

replace the vessel under the outlet.

→

The prompt 

Refill water tank 

will appear on the 

graphic display.

14  Lift the lid of the water tank (Fig. 

A

, No. 

6

) and 

pull the water tank up and out of the appliance.

15 

Thoroughly

 rinse the water tank, fill it to the 

max. mark with fresh tap water, and reinsert it.

→

The integrated descaling programme is continued. 
This stage takes approximately 5 minutes. Water 

flows out of the outlet as well as in the interior of 

the appliance into the drip tray. The prompt 

Empty 

container and tray 

then appears on the graphic 

display.

Empty 

container

and tray

Descaling

Refill

water tank

Descaling

Empty 

container

and tray

Descaling