Melitta Caffeo CI - Инструкция по эксплуатации - Страница 38

36

9.7  Integrated descaling programme

The integrated descaling programme removes lime residues from the interior of the 

appliance. It takes a total of approximately 25 minutes. You can check the progress 

of the programme at any time on the progress bar on the graphic display.

Caution!

–

Run the integrated descaling programme every 3 months; at the latest, 

however, when a prompt appears on the graphic display.

–

Only use the Melitta

®

 ANTI CALC Espresso Machines descaling agent. 

These descaling agents are specifically designed for the Melitta

®

CAFFEO

®

 CI

®

.

–

Never use vinegar or other descaling agents.

Run the integrated descaling programme as follows:

1  Select the 

Care

 sub-menu.

2  Turn the rotary switch until 

Descaling 

is 

highlighted and press it to confirm the selection.

3  Turn the rotary switch until

 Start

 is highlighted 

and press it to start the programme.

→

The prompt 

Empty container and tray

 will appear 

on the graphic display

.

4  Empty the drip tray and the coffee grounds 

container and then reinsert them.

→

The prompt 

Remove water tank 

will appear on the 

graphic display.

5  Lift the lid of the water tank (Fig. 

A

, No. 

6

) and 

pull the water tank up and out of the appliance 

and then empty it completely.

6

  If you are using a water filter, remove it from 

the water tank.

7  Add the descaling agent (e.g. Melitta

®

 ANTI 

CALC Espresso Machines liquid descaling agent) 

to the water tank according to the instructions on 

the packaging.

Care

Descaling

Cleaning

Filter

Descaling

Start

Exit

Empty 

container

and tray

Descaling

Remove

water tank

Descaling