Krups EA819N10 Arabica - Инструкция по эксплуатации - Страница 29

27

EN

Starting the preparation

For a personalised cappuccino, the machine enables you to choose different volumes of milk and coffee, according to
your preferences.  

- Press the recipe choice key 

(17)

until the 

pictogram is displayed.

Installing the milk pot on the machine

Prior to first use, carefully clean the various elements.
The milk pot is composed of a plastic container

(W)

, a lid 

(R)

including a cassette 

(V)

and a flexible tube 

(U)

connecting

to the machine's drink outlet. 

- Pour the milk in the pot (a minimum of 150 ml) 

(18)

.

- Put the lid on the pot by screwing it on 

(19)

.  

- Lift the lock lever 

(20)

. 

- Install the milk pot on the machine by connecting it to the steam outlet 

(21)

then lower the lock lever 

(22)

. 

- Insert the flexible tube in the cassette opening intended for this purpose 

(23)

then place the other end under

the magnetic drink outlet 

(23)

. 

- Check that the cappuccino/clean selection knob on the milk pot lid is properly set to the cappuccino position

(24)

.

Personalisation 

Strength 

- Choose the desired intensity by increasing or reducing the number of coffee beans

using the keys

(25)

.

Volume of coffee

- Next, press the navigation key 

to go to the setting of the final desired drink volume. You may increase and

reduce the volume using the keys 

(26

).

Volume of milk

- And finally, you may set the desired volume of milk 

using keys 

(27)

.

- Press the start/stop key 

(28)

.

To stop the flow into your cup, press the start/stop key 

.

You  may  also  adjust  the  temperature  of  your  coffee;  to  do  so,  press  the  settings  and  maintenance  button 

then,

using the navigation key, position it on

and set the desired temperature level using the keys

.

Rinse of the milk pot (approximately 30 seconds)

Each time a cappuccino recipe is prepared, the machine prompts you to perform a rinse of the milk pot via the appearance

of the pictogram

(31)

. It is preferable to perform the rinse of your milk pot to guarantee the performance of your machine

and optimal hygiene. To perform this rinse, it is not necessary to empty the milk remaining in the milk pot.

- When the pictogram 

is displayed, press the parameters button 

(31)

. 

- Turn the knob of the milk pot to the CLEAN position 

(32)

.

- Ensure that the milk pot is properly connected to the machine and in locked position (lever lowered)

(22)

.

- Press the START/STOP button 

(33)

, the rinse cycle starts.

BE  CAREFUL,

IF  YOU  INTERRUPT  THE  PREPARATION  OF  YOUR  DRINK,  STOPPAGE  IS  NOT

IMMEDIATE.

KR_ARABICA-LATTE_EA819_8020002251_EN.qxp_Mise en page 1  17/08/2018  14:02  Page27