Кофемашина Siemens TI9573X1RW (EQ.9 plus connect s700) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
en
Operating the appliance
20
The appliance is set to "barista mode"
by default. Additional values can
therefore be set using the two
navigation buttons. "Barista mode" can
The factory settings are shown in
orange on the display. The currently
selected settings are backlit.
Adjusting the coffee strength or
selecting ground coffee
A coffee drink is selected.
1.
Press the
"
button.
2.
Use the rotary selector to set the
coffee strength or select ground
coffee.
3.
Press the
"
button or the rotary
selector to confirm.
Aroma setting
The longer coffee is brewed, the more
bitter substances and undesirable
aromas are released. This has a
negative effect on the taste and makes
the coffee less easily digestible. The
appliance therefore offers special
aroma settings for extra strong coffee:
doubleShot and TripleShot. Depending
on the setting, once half or a third of the
volume has been prepared, a second
portion of coffee beans is ground and
brewed, so that in each case only the
pleasant and beneficial flavours and
aromas are released.
Notes
■
The doubleShot setting can be
selected for all coffee drinks except
for:
–
drinks with a small volume of
coffee, e.g. Ristretto
–
coffee drinks with milk and a
small volume of coffee
–
a small volume of coffee, e.g.
setting 200 ml "Caffe Latte" with
a 90% share of milk (10% share
of coffee)
–
preparation with ground coffee
–
dispensing two cups
■
The aroma setting TripleShot can
only be selected for Coffee XL.
–
Dispensing two cups is not
possible
Adjusting the milk/coffee mixing ratio
A coffee drink with milk is selected.
1.
Press the
milk
button.
2.
Use the rotary selector to set the
share of milk in %.
Example:
When a value of 30% is
configured, 30% milk and 70%
coffee will be dispensed.
3.
Press the
milk
button or the rotary
selector to confirm.
Selecting cup size
A drink is selected.
1.
Press the
ml
button. The preset
volume depends on the type of
beverage.
2.
Use the rotary selector to adjust the
desired volume in ml increments.
3.
Press the
ml
button or the rotary
selector to confirm.
Notes
■
The volume cannot be changed for
ristretto.
■
The volume dispensed can fluctuate
depending on the quality of the milk.
