Bosch TCA 5401 - Инструкция по эксплуатации - Страница 23

19

en

Troubleshooting

Problem

Possible cause

Solution

555

lashing when bean 

container is full.

The grinding unit is not yet 
full enough.

Press coffee dispensing 
button 

4

 again

No hot water or steam 
discharge.

Nozzle 9 is blocked.

Clean nozzle 9.

Foam insuficient or too 

runny.

Sleeve b on nozzle 9 not in 
correct position.

Milk not suitable for foaming

Push down sleeve b on 
nozzle 9.

Use cold low-fat (1.5% fat) 
milk.

Coffee dispensing slows to 
a trickle.

Coffee is ground too ine. 

Pre-ground coffee is too 

ine.

Adjust the grinding unit to a 
coarser setting.
Use a more coarsely-
ground coffee.

Coffee not dispensed.

Water tank not illed or not 

correctly positioned.

Fill water tank and make 
sure it is in the right 
position. If necessary, 

ill water pipes (see 

section “Switching on the 
appliance”).

Coffee has no ”crema” 
(creamy foam).

Unsuitable type of coffee.
Beans no longer fresh.

Degree of grinding 
inappropriate for beans.

Change type of coffee used.
Use fresh beans.

Optimize degree of 
grinding.

Grinding unit does not grind 
the beans.

Beans are not falling into 
the grinding unit (beans too 
oily).

Gently tap the bean 
container.

Grinding unit makes a loud 
noise.

Foreign objects in the 
grinding unit (e.g. grit, 
which can be found even in 
superior types of coffee).

Call the hotline.
Note: The appliance can 
still be used to make pre-
ground coffee.

Stand-by button 

a

 and 

steam button 

h

 lash 

alternately.

The brewing unit 18 is 
missing, or is not properly 
inserted or secured.

Insert and secure the 
brewing unit 18. 

If problems cannot be eliminated, always call the hotline.