CONDTROL GFX360-3 - Инструкция по эксплуатации - Страница 3

4

5

user manual

EN

GFX 200/GFX 300/GFX 360/GFX 360

3

user manual

EN

GFX 200/GFX 300/GFX 360/GFX 360

3

C ROS S 

L INE L A SER

C ROS S 

L INE L A SER

Congratulations on your purchase of laser levels GFX 200/GFX 300/

GFX 360/GFX 360

3

 CONDTROL.

Safety instructions can be found in the end of this user manual and 

should be carefully read before you use the device for the first time.

1. SAFE T Y REGUL AT I ON S 

The user manual should be read carefully before you use the device 

for the first time. Unintended use of the device can be dangerous for 

human’s health and cause serious injury. Keep this user manual. If the 

device is given to somebody for temporary use, be sure to enclose 

user manual to it.

- Do not misuse the device. 

- Do not remove warning signs and protect them from abrasion, 

because they contain information about safe operation of the device.

- Do not look into the laser beam or its reflection, with unprotected 

eye or through an optical instrument. Do not point the laser beam at 

people or animals without the need. You can dazzle them.

- To protect your eyes close them or look aside.

-Always install the product in such a way, so that the laser line is below 

or above the eye level.

- Do not let unauthorized people enter the zone of product operation.

- Store the product beyond reach of children and unauthorized 

people.

- It is prohibited to disassemble or repair the product yourself. Entrust 

product repair to qualified personnel and use original spare parts 

only.

Laser radiation!

Do not stare into beam

Class 2 laser

<1 mW 520 nm

EN60825-1:2014

2. PRODUCT DESCRIPTION

Laser levels GFX 200/GFX 300/GFX 360/GFX 3603 CONDTROL are 

designed for projecting and controlling of vertical and horizontal 

planes and lines.
The laser levels have 2 operating modes:

- Locked compensator, to project inclined planes and lines;
- Automatic leveling, which allows to automatically compensate 

irregularities within self-leveling range of ±5°. 

Pulse mode allows to increase working range of the laser level by using 

the laser receiver or to work when laser is hard to define in bright 

lighting conditions.

These laser levels are suitable for use at both indoor and outdoor 

building areas.

- Do not use the product in explosive environment, close to flammable 

materials.

- Avoid heating the batteries to avoid the risk of explosion and 

electrolyte leakage. In case of liquid contact with skin, wash it 

immediately with soap and water. In case of contact with eyes, flush 

with clean water during 10 minutes and consult the doctor.