Измерительные приборы CONDTROL GFX360-3 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
20
21
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
C ROS S
L INE L A SER
C ROS S
L INE L A SER
Failure to observe the following rules may lead to electrolyte
leakage from the batteries and failure of the device:
- Remove the battery from the device, if it’s not used for a long time.
- Do not leave discharged battery in the device.
- Avoid heating the batteries to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.
9. UTILIZATION
Expired tools, accessories and package should be passed for waste
recycle. Please send the device to the following address for proper
recycle:
CONDTROL GmbH
Wasserburger Strasse 9
84427 Sankt Wolfgang
Germany
Do not throw the device in municipal waste!
According to European directive 2002/96/ЕC, expired measuring tools
and their components must be collected separately and submitted to
environmentally friendly recycle of wastes.
10. WARRANTY
All CONDTROL GmbH devices go through post-production control and
are governed by the following warranty terms. The buyer’s right to
claim about defects and general provisions of the current legislation
do not expire.
1) CONDTROL GmbH agrees to eliminate all defects in the device,
discovered during the warranty period, that represent the defect in
material or workmanship in full volume and at its own expense.
2) The warranty period is 24 months and starts from the date of
purchase by the end customer (see the original supporting document).
3) The warranty doesn’t cover defects resulting from wear and tear or
improper use, malfunction of the device caused by failure to observe
the instructions of this user manual, untimely maintenance and
service and insufficient care, the use of non-original accessories and
spare parts. Modifications in design of the device relieve the seller
from responsibility for warranty works. The warranty does not cover
cosmetic damage, that doesn’t hinder normal operation of the device.
4) CONDTROL GmbH reserves the right to decide on replacement or
repair of the device.
5) Other claims not mentioned above, are not covered by the warranty.
6) After holding warranty works by CONDTROL GmbH warranty period
is not renewed or extended.
7) CONDTROL GmbH is not liable for loss of profit or inconvenience
associated with a defect of the device, the rental cost of alternative
equipment for the period of repair.
This warranty applies to German law except provision of the United
Nations Convention on contracts for the international sale of goods
(CISG).
In warranty case please return the device to retail seller or send it with
defect description to the following address:
CONDT ROL GmbH
Wasserburger Strasse 9
84427 Sankt Wolfgang
Germany
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
