ADA Cube 360 Green Professional Edition - Инструкция по эксплуатации - Страница 4

4

English

        LASER LINES

        FEATURES 

1. 

Vertical laser beam (V) / Horizontal laser beam (H)

2. 

Detector mode

3. 

Battery compartment

4. 

Tripod mount 1/4’’

5. 

Compensator switch (ON/X/OFF)

6. 

Vertical laser window

7. 

Horizontal laser window

SAFETY INSTRUCTIONS

Follow safety requirements! Don’t face and stare at laser beam!
Line laser is an accurate Instrument, which should be stored and used 
with care. Avoid shaking and vibrations! Store the Instrument and It’s 
accessoriesnly In the carrying case.
In case of high humidity and low temperature, dry out the  line laser  and 
clean It after the usage. Do not store the line laser at a temperature be-
low -20°C and above 50°C, otherwise the  line laser  can be out of action.
Don’t put the  line laser  Into the carrying case If the  line laser  or case are 
wet. To avoid moisture condensation Inside the Instrument- dry out the 
case and laser  line laser ! Check regularly Instrument  line laser ! Keep the 
lens clean and dry. To clean the  line laser  use a soft cotton napkin!

OPERATION

1. Before use, remove battery compartment cover. Insert three batteries 
into battery compartment with proper polarity, then put the cover back.
2. Set the compensator locking grip (5) into ON position. If the switch is ON,that 
means the power is on and the compensator is working.  If the switch (5) is 
in intermediate position, that means the power is opened,the compensation 
is still locked, but it will not warn if you issue the slope. It’s the hand-mode.

1

2