DIGITUS (DN-170094) - Инструкция по эксплуатации - Страница 3

Источники бесперебойного питания DIGITUS (DN-170094) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 36
Загружаем инструкцию
background image

 

1.

 

Important safety warning

 

Important safety instructions – Save these instructions 

Please comply with all warnings and operating instructions in this manual strictly. 

Save this manual properly and read carefully the following instructions before 

installing the unit. Do not operate this unit before reading through all safety 

information and operating instructions carefully. 
There exists dangerous voltage and high temperature inside the UPS. During the 

installation, operation and maintenance, please abide the local safety instructions 

and relative laws, otherwise it will result in personnel injury or equipment damage. 

Safety instructions in this manual act as a supplementary for the local safety 

instructions. Our company will not assume the liability that caused by disobeying 

safety instructions. 
 

1.1 Transportation 

 

Please transport the UPS system only in the original package to protect against 

shock and impact.   

 

1.2 Preparation 

 

Condensation may occur if the UPS system is moved directly from cold to warm 

environment. The UPS system must be absolutely dry before being installed. Please 

allow at least two hours for the UPS system to acclimate the environment. 

 

Do not install the UPS system near water or in moist environments.   

 

Do not install the UPS system where it would be exposed to direct sunlight or near 

heater.   

 

Do not block ventilation holes in the UPS housing. 

 

1.3 Installation 

 

Do not connect appliances or devices which would overload the UPS system (e.g. 

laser printers) to the UPS output sockets.   

 

Place cables in such a way that no one can step on or trip over them.   

 

Do not connect domestic appliances such as hair dryers to UPS output sockets.   

 

The UPS can be operated by any individuals with no previous experience.   

 

Connect the UPS system only to an earthed shockproof outlet which must be 

easily accessible and close to the UPS system.   

 

Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of your 

computer) to connect the UPS system to the building wiring outlet (shockproof 

outlet). 

 

Please use only VDE-tested, CE-marked power cables to connect the loads to the 

UPS system. 

 

When installing the equipment, it should ensure that the sum of the leakage 

current of the UPS and the connected devices does not exceed 3.5mA.   

 

 

 

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к DIGITUS (DN-170094)?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"