Liebherr KTPesf 1750 Premium - Инструкция по эксплуатации - Страница 4

Safety instructions and warnings

Disposal notes

The packaging is made of recyclable materials.
-   Corrugated board/board

-   EPS moulded parts

-   Polythene sheets

-   Polypropylene straps

W

Keep packaging materials away from children - poly-

thene sheets and bags can cause suffocation!

W

  Please return the packaging to an official collection point.

Your old appliance:

 This contains some reusable 

materials and should be disposed of properly - not 

simply with unsorted household refuse.

W

  Discarded appliances should be disabled: 

Remove the plug, cut through the connection 

cable and render the catch unusable so that 

children 

     cannot become trapped inside.

W

  Ensure that the refrigerant circuit is not dam-

aged when the appliance that is no longer needed is taken 

away for disposal.

W

  Details of the refrigerant can be found on the type plate.

W

  Appliances which are no longer needed must be disposed of 

in a professional and appropriate way, in accordance with the 

current local regulations and laws.

Technical safety

W

  To prevent injury or damage to the unit, the appliance  

should only be transported wrapped and set up by  

two people. 

W

  The refrigerant R 600a is environmentally friendly but  

flammable.

W

  Do not damage the refrigerant circuit pipes. Splashes of refrig-

erant can harm your eyes or ignite. 

W

  If refrigerant escapes, remove all naked flames or sources 

of ignition in the vicinity of the leak, disconnect the appliance 

from the mains and ventilate the area well.

W

  In the event that the appliance is damaged, contact the sup-

plier immediately before connecting to the mains.

W

  To guarantee safe operation, ensure that the appliance is set 

up and connected as described in these operating instruc-

tions.

W

  In the event of a fault, disconnect the appliance from the 

mains: disconnect mains plug (do not pull on the connection 

cable) or trigger or unscrew fuse.

W

  Any repairs and work on the appliance should only be 

carried out by  the customer service department, as 

unauthorised work could prove highly dangerous for the 

user.

 The same applies to changing the mains power cable.

Safety during use

W

  Do not store explosives or sprays using combustible 

propellants such as butane, propane, pentane, etc. in 

the appliance. Electrical components might cause leaking gas 

to ignite. You can identify such sprays by the printed contents 

or a flame symbol.

W

  Only store high-percentage alcohol in tightly sealed, upright 

containers.

W

  Do not allow naked flames or ignition sources to enter the ap-

pliance.

W

  Do not use electrical appliances inside the appliance (e.g. 

steam cleaners, heaters, ice makers, etc.).

W

  Do not stand on the plinth, drawers or doors or use them to 

support anything else.

W

  Do not let children play with the appliance, e.g. do not allow 

them to sit in the drawers or swing on the door. This appliance 

is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities or lack of 

experience and knowledge unless they have been given initial 

supervision or instruction concerning use of the appliance by 

a person responsible for their safety. Children should be su-

pervised to ensure that they do not play with the appliance. 

W

  Avoid prolonged skin contact with cold surfaces or chilled/fro-

zen food. This could cause pain, numbness and frostbite. Pro

-

tect against long-term contact with the skin, e.g. wear gloves.

W

  Do not consume food which has been stored for too long, as it 

could cause food poisoning.

W 

Special-purpose lamps (incandescent lamps, LEDs, fluores-

cent tubes) in the appliance serve to illuminate the appliance

  interior and are not suited for room illumination.

Setting up

W

  When setting up/fitting ensure that the refrigerant 

circuit pipes are not damaged.

W

  Once in position, use a 10 spanner to adjust the feet 

so that the appliance is level and does not wobble.

W

  Standard EN 37 specifies that the room in which you install 

your appliance must have a volume of  

1 m

3

 per  g of R 600a refrigerant used in the appliance, so as 

to avoid the formation of inflammable gas/air mixtures in the 

room where the appliance is located in the event of a leak in 

the refrigerant circuit. The quantity of refrigerant used in your 

appliance is indicated on the type plate on the inside 

of the appliance.

W

  Always position the appliance directly up against the 

wall.

W

  The ventilation grilles should not be obstructed. 

Observe the appendix to the installation and modifica-

tion instructions.

W

 Condensation may form on the outside of the refrigerator/

freezer during periods of high humidity. Constant ventilation of 

the installation site is recommend.

W

  Do not place heat-emitting appliances, e.g. microwave oven, 

toaster, etc., on top of the refrigerator or freezer.

W 

Keep burning candles, lamps and other items with naked 

flames away from the appliance so that they do not set the 

appliance on fire.

W 

Fire hazard due to dampness!

     If live parts or the mains lead become damp this may cause 

short circuits.

-    The appliance is designed for use in enclosed areas. Do not 

operate the appliance outdoors or in areas where it is exposed 

to splash water or damp conditions.

W 

CAUTION! Risk of injury and danger of damage as a result of 

incorrect transport!

-   Transport the appliance in a packed condition.

-   Transport the appliance upright.

-   Do not transport the appliance without assistance.

W

  The appliance may be moved only when it is empty.

Connecting to the mains

Power supply (AC) and voltage

at the operating point must comply with the details 

on the rating plate. which is located on the inside left of the 

appliance, next to the vegetable bins. 

W

  Connect the appliance with a properly earthed fused plug and 

socket only.

W

  The socket must be fused with a 10 A fuse or higher, it must 

be away from the rear of the appliance and must be easily ac-

cessible.

W

  Do not connect the appliance to the supply with other equip-

ment using a distribution outlet - risk of overheating.

W

  When removing the mains cable from the back of the appli-

ance, remove the cable holder as well so as to avoid vibration 

noise.

*

 according to Model and design

10