Liebherr KBes 3660 Premium BioFresh - Инструкция по эксплуатации - Страница 8

u

To  set  the  display  brighter:  press  the  Up

setting button

 Fig. 3 (7).

u

To  set  the  display  darker:  press  the  Down

setting button

 Fig. 3 (6).

u

To  confirm:  briefly  press  the  SuperCool

button

 Fig. 3 (2).

w

The brightness is adjusted to the new value.

u

To  deactivate  the  setting  mode:  press  the  On/Off  button

Fig. 3 (3).

-or-

u

Wait for 5 minutes.

w

The  temperature  is  indicated  again  in  the  temperature

display.

5.2 Child proofing

The  child-proofing  function  enables  you  to  make  sure  that  the

appliance is not inadvertently switched off by playing children.

5.2.1 Setting the child lock function

u

To  activate  the  setting  mode:  press  SuperCool  button

Fig. 3 (2) for about 5 s.

w

The display indicates 

c

.

w

The menu symbol

 Fig. 3 (5) shines.

u

Briefly press theSuperCool button

 Fig. 3 (2) to confirm.

When 

c1

 is indicated in the display:

u

to  activate  the  child  lock,  briefly  press  the

SuperCool button

 Fig. 3 (2).

w

The  child  lock  symbol

  Fig.  3  (12)  shines. 

c

  flashes  in  the

display.

When 

c0

 is indicated in the display:

u

to  deactivate  the  child  lock,  briefly  press  the  SuperCool

button

 Fig. 3 (2).

w

The  child  lock  symbol

  Fig.  3  (12)  goes  out. 

c

  flashes  in  the

display.

u

To  deactivate  the  set-up  mode:  press  On/Off  button

Fig. 3 (3).

-or-

u

Wait for 5 minutes.

w

The  temperature  is  indicated  again  in  the  temperature

display.

5.3 Door alarm

If the door is open longer then 60 s, the audible alarm sounds.
The  audible  alarm  is  automatically  silenced  when  the  door  is

closed.

5.3.1 Muting the door alarm

The  audible  alarm  can  be  muted  when  the  door  is  open.  The

sound  switch-off  function  is  active  as  long  as  the  door  is  left

open.

u

Press alarm button

 Fig. 3 (1).

5.4 Refrigerator compartment

The  natural  circulation  of  air  in  the  refrigerator  compartment

results  in  zones  differing  in  temperature.  It  is  coldest  directly

above  the  plate  separating  off  the  BioFresh  zone  and  at  the

rear wall. It is warmest at the top front of the compartment and

in the door.

5.4.1 Food refrigeration

Note

The  energy  consumption  increases  and  the  cooling  perform-

ance decreases if the ventilation is inadequate.

u

Always keep the air slits of the fan free.

u

Place butter and preserves in the upper area and in the door

(see Appliance at a glance).

u

Use  recyclable  plastic,  metal,  aluminium  and  glass

containers and cling film for wrapping.

For appliances from 1216 mm high:*

u

Use the front area of the refrigerator compartment floor only

for  briefly  putting  down  cooled  products,  e.g.  when  rear-

ranging  and  sorting.  However  do  not  leave  cooled  products

there  otherwise  they  may  be  pushed  back  or  tipped  over

when the door is closed.

u

Do  not  store  food  too  close  together  to  enable  good  air

circulation.

u

To  safeguard  bottles  from  tipping  over:  move  the  bottle

holder.

At  the  base  of  the  refrigerator  compartment,  the  integrated

bottle shelf or alternatively the glass shelf can be used:

u

To  use  the  bottle  shelf:

store  the  glass  shelf

compactly  under  the

bottle shelf.

u

Place the bottles with the

base pointing backwards

facing the rear wall.

If  the  bottles  project

beyond the bottle shelf:

u

set  the  lower  door  rack

one position higher.

5.4.2 Setting the temperature

The  temperature  can  be  set  from  9  °C  to  3  °C,  the  recom-

mended temperature is 5 °C.

u

For a higher temperature setting: press Up button

 Fig. 3 (7).

u

For  a  lower  temperature  setting:  press  Down  button

Fig. 3 (6).

w

The  first  time  the  button  is  pressed,  the  value  set  so  far  is

indicated in the temperature display.

u

To  change  the  temperature  in  1  °C  steps:  briefly  press  the

button.

u

To  change  the  temperature  continuously:  hold  down  the

button.

w

The value is displayed flashing during the setting operation.

w

The  actual  temperature  is  displayed  about  5  s  after  the  last

press of a button. The temperature slowly adjusts to the new

value.

5.4.3 SuperCool

With SuperCool you switch to the highest cooling performance

to reach lower cooling temperatures. Use SuperCool, to rapidly

cool large amounts of food.
The SuperCool function uses slightly more energy.
Cooling with SuperCool

u

Briefly press SuperCool button

 Fig. 3 (2).

w

The SuperCool symbol

 Fig. 3 (11) lights up in the display.

w

The  cooling  temperature  drops  to  the  coldest  value.  Super-

Cool is activated.

w

SuperCool  is  automatically  deactivated  after  6  to12  hours

The  appliance  continues  to  operate  in  the  energy-saving,

normal mode.

To prematurely deactivate SuperCool

u

Briefly press SuperCool button

 Fig. 3 (2).

w

The SuperCool symbol

 Fig. 3 (11) goes out in the display.

w

SuperCool is deactivated.

Control

8