Liebherr KBes 3660 Premium BioFresh - Инструкция по эксплуатации - Страница 5

NOTICE*

The  stainless  steel  doors  are  provided  with  a  high-quality

surface  coating  and  must  not  be  treated  using  the  accompa-

nying care product.

Otherwise the surface coating will be affected. 

u

Wipe  the  coated  door  surfaces  using  a  soft,  clean  cloth

only.

u

Apply  a  stainless  steel  cleaner  only  to  the  stainless  steel

side  walls  evenly,  wiping  with  the  grain.  Subsequent

cleaning becomes easier as a result.

u

Wipe  side  walls  with  a  paint  finish  using  a  soft,  clean

cloth only.

u

Remove the protective film from the decorative trims.

u

Remove all transit supports.

u

Dispose of packaging material (see 4.5) .

NOTICE

Risk of damage due to condensate!

If your appliance is not a Side-by-Side (SBS) appliance:

u

do not install the appliance directly alongside a further refrig-

erator/freezer.

u

Align  the  appliance  so  that  it

stands firmly and on a level by

applying  the  accompanying

spanner  to  the  adjustable-

height  feet  (A)  and  using  a

spirit level.

u

Then support the door: Extend

the  adjustable  foot  at  the  turn

hinge  (B)  until  it  rests  on  the

floor  and  then  make  a  further

90° turn.

When  a  Side-by-Side  appliance  (S…)  is  fitted  together  with

a second appliance (as a SBS combination):

u

Proceed  according  to  the  Side-by-Side  combined  fridge-

freezer installation instructions. (Accessories bag of the SBS

freezer/appliance with freezer compartment)

Note

u

Clean the appliance (see 6.1) .

If  the  appliance  is  installed  in  a  very  damp  environment,

condensate may form on the outside of the appliance.

u

Always see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary.

NOTICE

Risk  of  damage  to  side-by-side  appliances  due  to  condensa-

tion!

When  a  side-by-side  appliance  (S…)  is  fitted  together  with  a

second  appliance  (as  a  SBS  combination),  the  door  hinges

must remain as delivered.

u

Do not change over the door hinges.

Ensure that the following tools are to hand:

q

Torx® 25

q

Torx® 15

q

Screwdriver

q

Cordless screwdriver, if necessary

q

Second person for fitting work, if needed

q

Accompanying Allen key size 2*

4.3.1 Detaching the door

Note

u

Remove  any  food  from  the  door  racks  before  removing  the

door, so that no food falls out.

Fig. 4 

u

Close the door.

u

Pull off the cover

 Fig. 4 (10) forwards and upwards.

u

Lift off the cover

 Fig. 4 (11).

CAUTION

Risk of injury if the door tips!

u

Take good hold of the door.

u

Set down the door carefully.

u

Unscrew  the  upper  turn  hinge

  Fig.  4  (12)(2x  Torx®  25)

Fig. 4 (13) and lift it off.

u

Lift off the door and set it aside.

4.3.2 Distinguishing between bearing elements

Some  appliances  are  height-adjustable,  as  can  be  noted  from

the bearing pin in the lower turn hinge:

u

For  appliances  without

height 

adjustment,

continue 

with 

item

(see 4.3.3) .

u

For  appliances  with

height 

adjustment

continue  with  item  .

(see 4.3.4)

4.3.3 Changing the bearing parts

for appliances without height adjustment

Putting into operation

5