Liebherr KBes 3660 Premium BioFresh - Инструкция по эксплуатации - Страница 4

-

Keep  burning  candles,  lamps  and  other  items  with  naked

flames  away  from  the  appliance  so  that  they  do  not  set  the

appliance on fire.

-

Only store high-percentage alcohol in tightly sealed, upright

containers.  Alcohol  possibly  escaping  may  ignite  due  to

electrical components.

Danger of tipping and falling:

-

Do not misuse the plinth, drawers, doors etc. as a step or for

support. This applies particularly to children.

Danger of food poisoning:

-

Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

-

Avoid lasting skin contact with cold surfaces or refrigerated/

frozen  food  or  take  protective  steps,  e.g.  wear  gloves.  Do

not consume ice cream, water ice or ice cubes immediately

and do not consume them too cold.

Please  observe  the  specific  information  in  the  other

sections:

DANGER

identifies a situation involving direct

danger which, if not obviated, may

result in death or severe bodily

injury.

WARNING

identifies a dangerous situation

which, if not obviated, may result in

death or severe bodily injury.

CAUTION

identifies a dangerous situation

which, if not obviated, may result in

minor or medium bodily injury.

NOTICE

identifies a dangerous situation

which, if not obviated, may result in

damage to property.

Note

identifies useful information and tips.

3 Controls and displays

3.1 Operating and control elements

Fig. 3 

(1) Alarm button

(7) Up setting button

(2) SuperCool button

(8) Holiday button

(3) On/Off button

(9) Temperature display

(4) Alarm symbol

(10) HomeDialog symbol

(5) Menu symbol

(11) SuperCool symbol

(6) Down setting button

(12) Child-proofing symbol

3.2 Temperature display

The following are displayed in normal operation:

-

the average cooling temperature

The  following  displays  indicate  malfunction.  Possible  causes

and corrective action (see Malfunction).

-

F0

 to 

F9

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk  of  injury  and  danger  of  damage  as  a  result  of  incorrect

transport!

u

Transport the appliance in a packed condition.

u

Transport the appliance upright.

u

Do not transport the appliance without assistance.

4.2 Installing the appliance

In the event that the appliance is damaged, contact the supplier

immediately before connecting to the mains.
The floor at the site must be flat and level.
Do not install the appliance in a location where it is exposed to

direct radiation of the sun, next to a cooker, heater and similar.
Always  install  the  appliance  with  the  back  directly  against  the

wall.
Do not install the appliance without assistance.
Standard  EN  378  specifies  that  the  room  in  which  you  install

your  appliance  must  have  a  volume  of  1  m

2

  per  8  g  of  R  600a

refrigerant used in the appliance. If the room in which the appli-

ance  is  installed  is  too  small,  a  flammable  gas-air  mixture  may

form  in  the  event  of  a  leakage  in  the  refrigeration  circuit.  The

quantity of refrigerant used in your appliance is indicated on the

type plate on the inside of the appliance.
The appliance may be moved only when it is empty.

WARNING

Fire hazard due to dampness!

If  live  parts  or  the  mains  lead  become  damp  this  may  cause

short circuits.

u

The appliance is designed for use in enclosed areas. Do not

operate  the  appliance  outdoors  or  in  areas  where  it  is

exposed to splash water or damp conditions.

WARNING

Fire hazard due to refrigerant!

The  refrigerant  R  600a  is  environmentally  friendly  but  flam-

mable. Escaping refrigerant may ignite.

u

Do not damage the piping of the refrigeration circuit.

WARNING

Fire hazard and danger of damage!

u

Do  not  place  appliances  emitting  heat  e.g.  microwaves,

toasters etc. on the appliance!

WARNING

Blocked ventilation openings pose a risk of fire and damage!

u

Always  keep  the  ventilation  openings  clear.  Always  ensure

that the appliance is properly ventilated!

u

Detach the connecting cable from the rear of the appliance,

removing  the  cable  holder  at  the  same  time  because  other-

wise there will be vibratory noise!

u

Remove  the  protective  film  from  the  outside  of  the  appli-

ance.*

Controls and displays

4