Korting KSI 8185 - Инструкция по эксплуатации - Страница 36

EN - 36

5.1 Defrosting

Defrosting the Refrigerator 

Compartment

• 

Defrosting occurs automatically in 

the refrigerator compartment during 

operation. The water is collected by 

the evaporation tray and evaporates 

automatically.

• 

The evaporation tray and the water drain 

hole should be cleaned periodically with 

the defrost drain plug to prevent the 

water from collecting at the bottom of the 

refrigerator instead of flowing out.

• 

You can also clean the drain hole by 

pouring half a glass of water down it.

Defrosting the Freezer Compartment

Frost accumulated in the freezer 

compartment should be removed regularly 

(using the plastic scraper provided). The 

freezer compartment should be cleaned 

in the same way as the refrigerator 

compartment, with the defrost function, at 

least twice a year.

For this:

• 

The day before you defrost, set the 

thermostat dial to position “5” to freeze 

food completely.

• 

During defrosting, frozen food should 

be wrapped in several layers of paper 

and kept in a cool place. The inevitable 

rise in temperature will shorten its 

storage life. Remember to use this food 

within a relatively short period of time.

•  Set the thermostat knob to position “•” 

and disconnect the appliance from the 

mains. Leave the door open until the 

unit is completely defrosted.

• 

To accelerate the defrosting process, 

place one or more bowls of warm water 

in the freezer compartment.

• 

Dry the inside of the unit carefully and 

set the thermostat knob to the MAX 

position.

5.2 Replacing the Light Bulb

Important note:

 Unplug the unit from 

the power supply before start the 

process.

1

2

3

4

5

1.  Remove the screw on the light cover by 

screw driver. (Fig.1)

2.  Press the hooks on light cover. (Fig. 2)

3.  Open the light cover towards arrow when 

top hooks pull out from housing. (Fig. 3)

4.  Pull out the cover towards arrow remove 

it. (Fig. 4)

5.  Turn the light bulb counter clockwise and 

remove it. (Fig. 5)

6.  Change the present light bulb with a new 

one of not more than 15 W. (Fig. 5)

7. Implement the steps in reverse order. 

8. After waiting 5 minutes, plug the unit.

Replacing LED Lighting

If your appliance has LED lighting 

contact the help desk as this should 

be changed by authorized personnel only.