Korting KNFC 71928 GW - Инструкция по эксплуатации - Страница 50

EN - 49

ERROR TYPE

MEANING

WHY

WHAT TO DO

E10

Fridge compartment is 

not cold enough

Likely to occur after:

 -

Long term power failure.

 -Hot food has been left in 

the fridge.

1. Set the fridge temperature to 

a colder value or set Super 

Cool. This should remove the 

error code once the required 

temperature has been reached. 

Keep doors closed to improve 

time taken to reach the correct 

temperature. 

2. Please empty the location 

at the front area of air duct 

channel holes and avoid 

putting food close to the 

sensor.

If this warning continues an 

authorised technician needs to be 

contacted.

E11

Fridge compartment is 

too cold

Various

1. 

Check is Super Cool mode is 

activated

2. Reduce the fridge 

compartment temperature

3. 

Check to see if vents are clear 

and not clogged

If this warning continues an 

authorised technician needs to be 

contacted.

If you are experiencing a problem with 

your 

appliance

, please check the following 

before contacting the after-sales service.

Your appliance is not operating

Check if:

•  There is power

• 

The plug is correctly placed in the socket

• 

The plug fuse or the mains fuse has 

blown

• 

The socket is defective. To check this, 

plug another working appliance into the 

same socket.

The appliance performs poorly

Check if:

• 

The appliance is overloaded

• 

The appliance door is closed properly

• 

There is any dust on the condenser

• 

There is enough space near the rear and 

side walls.

Your appliance is operating noisily

Normal noises

Cracking noise occurs:

• 

During automatic defrosting

• 

When the appliance is cooled 

or warmed (due to expansion of 

appliance material).

Short cracking noise occurs: 

When 

the thermostat switches the compressor 

on/off.

Motor noise: 

Indicates the compressor 

is operating normally. The compressor 

may cause more noise for a short time 

when it is first activated.

Bubbling noise and splash occurs: 

Due to the flow of the refrigerant in the 

tubes of the system.

Water flowing noise occurs: 

Due 

to water flowing to the evaporation 

container. This noise is normal during 

defrosting.

Air blowing noise occurs: 

In some 

models during normal operation of the 

system due to the circulation of air.

The edges of the appliance in contact 

with the door joint are warm

Especially during summer (warm seasons), 

the surfaces in contact with the door joint 

may become warmer during the operation 

of the compressor, this is normal.

There is a build-up of humidity inside 

the appliance

Check if: