Korting KNFC 71928 GW - Инструкция по эксплуатации - Страница 35

EN - 34

1.2 Installation warnings

Before using your fridge freezer for the first 

time, please pay attention to the following 

points:

• 

The operating voltage for your fridge 

freezer is 220-240 V at 50Hz.

• 

The plug must be accessible after 

installation.

• 

Your fridge freezer may have an odour 

when it is operated for the first time. This 

is normal and the odour will fade when 

your fridge freezer starts to cool. 

• 

Before connecting your fridge freezer, 

ensure that the information on the data 

plate (voltage and connected load) 

matches that of the mains electricity 

supply. If in doubt, consult a qualified 

electrician.

•  Insert the plug into a socket with an 

efficient ground connection. If the socket 

has no ground contact or the plug does 

not match, we recommend you consult a 

qualified electrician for assistance.

• 

The appliance must be connected 

with a properly installed fused socket. 

The power supply (AC) and voltage at 

the operating point must match with 

the details on the name plate of the 

appliance (the name plate is located on 

the inside left of the appliance).

• 

We do not accept responsibility for any 

damages that occur due to ungrounded 

usage.

•  Place your fridge freezer where it will not 

be exposed to direct sunlight.

• 

Your fridge freezer must never be used 

outdoors or exposed to rain.

• 

Your appliance must be at least 50 cm 

away from stoves, gas ovens and heater 

cores, and at least 5 cm away from 

electrical ovens.

• 

If your fridge freezer is placed next to a 

deep freezer, there must be at least 2 

cm between them to prevent humidity 

forming on the outer surface.

• 

Do not cover the body or top of fridge 

freezer with lace. This will affect the 

performance of your fridge freezer.

•  Clearance of at least 150 mm is required 

at the top of your appliance. Do not place 

anything on top of your appliance.

• 

Do not place heavy items on the 

appliance.

•  Clean the appliance thoroughly before 

use (see Cleaning and Maintenance).

•  Before using your fridge freezer, wipe all 

parts with a solution of warm water and 

a teaspoon of sodium bicarbonate. Then, 

rinse with clean water and dry. Return all 

parts to the fridge freezer after cleaning.

• 

Use the adjustable front legs to make 

sure your appliance is level and stable. 

You can adjust the legs by turning them 

in either direction. This must be done 

before placing food in the appliance.

If your refrigerator includes a fan 

condenser

-

The bottom cabinet cover is the 

plastic

The condenser of your fridge is located 

at the bottom of the cabinet. As a result, 

the fittings which control the distance 

between the refrigerator and the wall 

behind your fridge are located on the 

cover of the bottom of the cabinet. You 

can move your fridge toward the back 

wall until this point.

Plastic for distance setting

-

The bottom cabinet cover is the 

metal

The condenser of your fridge is placed 

at the bottom of cabinet. As a result 

of that, assemble the spacer by fixing 

it to holes on the cover bottom panel 

and turn 90° that’s shown below figure 

for arranging the distance between the 

refrigerator and the back wall at where 

you place the fridge. You can move the