Korting KNFC 62010 B - Инструкция по эксплуатации - Страница 45

EN - 44

5  CLEANING  AND 

MAINTENANCE

Disconnect the unit from the power 

supply before cleaning.

Do not wash your appliance by 

pouring water on it.

Do not use abrasive products, 

detergents or soaps for cleaning the 

appliance. After washing, rinse with clean 

water and dry carefully. When you have 

finished cleaning, reconnect the plug to the 

mains supply with dry hands.

•  Make sure that no water enters the lamp 

housing and other electrical components.

• 

The appliance should be cleaned 

regularly using a solution of bicarbonate 

of soda and lukewarm water.

•  Clean the accessories separately by 

hand with soap and water. Do not wash 

accessories in a dish washer.

•  Clean the condenser with a brush at least 

twice a year. This will help you to save on 

energy costs and increase productivity.

The power supply must be 

disconnected during cleaning.

5.1 Defrosting

water tray

• 

Your appliance performs automatic 

defrosting. The water formed as a result 

of defrosting passes through the water 

collection spout, flows into the water tray 

behind your appliance and evaporates 

there.

•  Make sure you have disconnected the 

plug of your appliance before cleaning 

the water tray.

•  Remove the water tray from its position 

by removing the screws (if it has screws). 

Clean it with soapy water at specific time 

intervals. This will prevent odours from 

forming.

Replacing LED Lighting

To replace any of the LEDs, please contact 

the nearest Authorised Service Centre.

Note:

 The numbers and location of the 

LED strips may change according to 

the model.

6  SHIPMENT  AND 

REPOSITIONING

6.1  Transportation and Changing 

Positioning

• 

The original packaging and foam may be 

kept for re-transportation (optional).

•  Fasten your appliance with thick 

packaging, bands or strong cords and 

follow the instructions for transportation 

on the packaging.

•  Remove all movable parts or fix them 

into the appliance  against shocks 

using bands when re-positioning or 

transporting.

Always carry your appliance in the 

upright position.

6.2 Repositioning the Door

• 

It is not possible to change the opening 

direction of your appliance door if door 

handles are installed on the front surface 

of the appliance door.

• 

It is possible to change the opening 

direction of the door on models with 

handle on the side of the door or without 

handles.

• 

If the door-opening direction of your 

appliance can be changed, contact the 

nearest Authorised Service Centre to 

change the opening direction.