Sharp SJ-FS97VSL - Инструкция по эксплуатации - Страница 31

31

ENGLISH

Canceling the ice making mode

Use this feature during night time or winter time.

•

You can use the ice storage box as a freezer case.

•

To cancel operation

1

Select ice making mode which is in operation.

2

Select “OFF”.

3

Finalize the setting.

4

Empty the water tank.

Dry it thoroughly and set into the original position.

After canceling the ice making

Even after canceling the set ice making mode, it will 

•

conduct once the ice releasing operation, therefore the ice 

tray and the detection lever will operate.

After finishing the ice releasing operation, ice making 

•

process indication will turn off.

Do not put any food until the ice making process indication  

•

turns off. Otherwise, it may break the detection lever.

To start operation again

Refer to “

Ice making

”.

Ice tray cleaning

You can clean the ice tray and the pipe.

Use this feature at the beginning or when the refrigerator 

has not been used for a long time.

The water is supplied from the water tank to the ice tray 

•

forcibly.

The water discharge amount at one cleaning will be 100mL.

•

However, when large ice mode is set as on, the water 

discharge will be 230mL.

Preparation 

Pour water into the water tank and set into the original 

position. Empty the ice storage box.

To start operation

1

Select ice tray cleaning icon.

2

Select “ON”.

3

Finalize the setting. (Ice tray cleaning will start.)

During ice tray cleaning operation

It takes about 40 sec. 

Do not pull out the ice storage box.

The process indication will toggle like in the 

above picture.

4

Follow steps 

2

 to 

3

again.

5

Finally push

button. Empty the water of the ice 

storage box.
Dry it thoroughly and set it into the original position.

NOTE

Once it completes cleaning, it returns to the ice making 

operation that it is currently set at.

♪♪

Flashing

Flashing

Empty

(B375).indb   31

2012/09/11   13:35:11