LG GC-L247CBDC - Инструкция по эксплуатации - Страница 33

33

EN

MAINTENANCE

Notes for Cleaning

•

When removing a shelf or drawer from inside 

the appliance, remove all stored foods from the 

shelf or drawer to prevent injury or damage to 

the appliance.

−

Otherwise, injury may occur due to the 

weight of stored foods.

•

If cleaning the outside air vents of the appliance 

by means of vacuuming, then the power cord 

should be unplugged from the outlet to avoid 

any static discharge that can damage the 

electronics or cause an electric shock.

•

Detach the shelves and drawers and clean them 

with water, and then dry them sufficiently, before 

replacing them.

•

Regularly wipe the door gaskets with a wet soft 

towel.

•

Door basket spills and stains should be cleaned 

as they can compromise storage ability of the 

basket and could even be damaged.

•

After cleaning, check if the power cable is 

damaged, warm or improperly plugged.

•

Keep the air vents on the exterior of the 

appliance clean.

−

Blocked air vents can cause fire or appliance 

damage.

•

When cleaning the inside or outside of the 

appliance, do not wipe it with a rough brush, 

toothpaste, or flammable materials. Do not 

use cleaning agents containing flammable 

substances.

−

This may cause discoloration or damage to 

the appliance.

−

Flammable substances: alcohol (ethanol, 

methanol, isopropyl alcohol, isobutyl alcohol, 

etc.), thinner, bleach, benzene, flammable 

liquid, abrasive, etc.

•

For the appliance exterior, use a clean sponge 

or soft cloth and a mild detergent in warm water. 

Do not use abrasive or harsh cleaners. Dry 

thoroughly with a soft cloth.

•

Never clean the shelves or containers in the 

dishwasher.

−

The parts may become deformed due to the 

heat.

•

If the appliance is equipped with an LED lamp, 

do not remove lamp cover and LED lamp in any 

attempt to repair or service it. Please, contact an 

LG Electronics customer information centre.

Cleaning the Condenser 

Cover

Use a vacuum cleaner with a brush to clean the 

condenser cover and vents. Do not remove the 

panel covering the condenser coil area.