LG GC-L247CBDC - Инструкция по эксплуатации - Страница 14

14

EN

Adjusting the Height of the 

Door

If the door of the appliance is not level, adjust the 

difference in the height of appliance door using the 

following method.

NOTE

•

Because the hinge pin may fall out, do not 

adjust the height of the appliance door more 

than 5 mm.

*Reference

Keeper nut
Adjustment hinge pin

1 

Turn the keeper nut clockwise using the 

spanner.

To loosen the nut

2 

Adjust the difference in the height of the 

appliance door by rotating the adjustment 

hinge pin clockwise or counterclockwise with 

an 8 mm spanner. 

Down

Up

3 

Fasten the keeper nut by turning it 

counterclockwise.

To tighten the nut

Connecting the Water Line 

(For Plumbed models 

Only)

Water Supply Requirements

A cold water supply with water pressure 

between 138 kPa and 827 kPa (1.4-8.4 kgf/

cm²) is required to operate the water dispenser. 

If the refrigerator is installed in an area with low 

water pressure (below 138 kPa), you can install 

a booster pump to compensate for the low 

pressure.
If a reverse osmosis water filtration system is 

connected to your cold water supply, the water 

pressure to the reverse osmosis system needs 

to be a minimum of 138 kPa to 827 kPa (1.4-8.4 

kgf/cm²)

WARNING

•

Unplug the appliance before carrying out any 

work on connecting the water line. Failure to do 

so may cause electric shock.

•

Only connect the water line to a cold water 

supply. Failure to do so may cause the water 

filter to malfunction. Water hammer (water 

banging in the pipes) in house plumbing can 

cause damage to appliance parts and can lead 

to water leakage or flooding.

•

Connecting the water line must only be installed 

by a qualified plumber and in accordance with 

local legislation and regulations governing water 

quality.