Philco PHGR9000 - Инструкция по эксплуатации - Страница 5

Copyright © 2020, Fast ČR, a. s.

Revision 11/2020

EN - 5

OPEN POSITION

Open the upper housing at 100°. To adjust the grill to this position, you need to lift the rocker by hand until you feel that the upper housing is locked in this position. 

Release your hands and keep the upper housing in this position until you close it.

HORIZONTAL PLACEMENT

The upper and lower baking trays can be placed horizontally, and the upper and lower trays are arranged in a row to form a large cooking area as a grill.

1.  Adjust grill to open position.

2.  Put your left hand on the rocker bar and push it gently in your direction and press the spring button at the same time. Push the rocker bar back until the upper 

housing is level. If the grill is in an open position and you want to adjust to a closed position, you need to gently pull the handle toward yourself until the upper 

housing is level.

REMOVE THE BAKING TRAY

1.  When the baked machine is in the cooling state, adjust it to the open position.

Press the ON/OFF button for the baking tray.

a.  The lower baking tray‘s switch button is on the right side of the base.

b.  The upper baking tray switch button is located in the middle of the upper housing.

2.  Grasp the baking tray with both hands and gently pull it out of the reflector.

REMOVE OIL-RECEIVING BOX

Make sure the oil tray slides into the center of the rear of the base before use. Oil stains on the baking tray can flow into the oil-receiving box through the oil receiving 

port. When the baked machine is completely cooled down, it can be removed and cleaned in the dishwasher.