WORX 40 В, АКБ 4 А*ч х2, ЗУ 2А х2 WG749E - Инструкция по эксплуатации - Страница 10

10

Cordless Lawn mower 

               EN

VIBRATION INFORMATION

Typical weighted vibration 

a

h

 <2.5 m/s²

Uncertainty 

K =   1.5  m/s²

WARNING: 

The vibration emission value during actual 

use of the power tool can differ from the declared 

value depending on the ways in which the tool is used 

dependant on the following examples and other variations 

on how the tool is used:

How the tool is used and the materials being cut or drilled.

The tool being in good condition and well maintained. 

Using the correct accessory for the tool and ensuring it is 

sharp and in good condition.

The tightness of the grip on the handles and if any anti 

vibration accessories are used.

And the tool is being used as intended by its design and 

these instructions. 

This tool may cause hand-arm vibration syndrome if 

its use is not adequately managed

WARNING: 

To be accurate, an estimation of exposure 

level in the actual conditions of use should also take 

account of all parts of the operating cycle such as the times 

when the tool is switched off and when it is running idle but 

not actually doing the job. This may significantly reduce the 

exposure level over the total working period.

Helping to minimise your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades.

Maintain this tool in accordance with these instructions and 

keep well lubricated (where appropriate).

If the tool is to be used regularly then invest in anti vibration 

accessories.

Plan your work schedule to spread any high vibration tool 

use across a number of days.

OPERATION INSTRUCTION

NOTE: Read instruction handbook before 

operation this machine.

INTENDED USE

This product is intended for domestic lawn mowing.

ASSEMBLY & OPERATION

ACTION

FIGURE

ASSEMBLY

Assembling the handle bar & 

Adjusting Handle’s height

NOTE: 

Press and hold 

Quick-release button during 

operation.

See Fig. A1, A2

Assembling the grass 

collection bag

See Fig. B

Assembling the grass 

collection bag to the lawn 

mower

NOTE:

 Depress the grass 

collection bag slightly to 

ensure that it is completely 

installed.

NOTE: 

Take the mulching insert 

out of the lawn mower before 

fitting the grass collection bag.

See Fig. C1, C2, C3

Removing/emptying grass 

collection bag

WARNING! 

Always check 

the safety flap close the 

discharge outlet before using. 

Never lift the safety flap when 

the lawn mower is being used 

without fitted grass collection 

bag.

See Fig. D1,D2

Installing mulching insert

See Fig. E

Removing /fitting the battery 

pack 

Insert the safety key before 

installing the battery pack.

NOTE: 

This machine will only 

run when sp - batteries are 

installed. It is recommended to 

use the same AH batteries and 

charge the two batteries at the 

same time.

When you use two batteries 

with different AH, the machine 

will only run to the lower 

common denominator.

See Fig. F1, F2

Checking the battery charge 

condition

NOTE: 

Fig. G1 only applies for 

the battery pack with battery 

indicator light.

See Fig.G1

Charging the battery pack

NOTE: 

The batteries are 

shipped uncharged. Each 

battery must be fully charged 

before the first mow. 

Always fully charge the two 

batteries at same time. 

More details can be found in 

charger’s manual

.

See Fig.G2

OPERATION