Гибридная Ryobi ONE+ RLM18C36H225 5133002587 - Инструкция по эксплуатации - Страница 6

is running.

■

Stop the mower motor and remove isolator 

key and/or disconnect from the power 

supply, make sure that all moving parts 

have come to a complete stop for the 

following cases:

●

whenever you leave the product 

unattended (including disposal of grass 

clippings).

●

before cleaning a blockage or unclogging 

discharge chute

●

before checking, cleaning or working on 

the product 

●

after striking a foreign object; inspect the 

product for damage and make repairs 

as necessary before restarting and 

operating the product.

●

before removing the grass box or 

opening the grass discharge chute 

cover.

●

If the product starts to vibrate abnormally 

(check immediately)

–

inspect for damage, particularly the 

blades

–

replace or repair any damaged parts

–

check for and tighten any loose parts

■

Avoid holes, ruts, bumps, rocks, property 

stakes, or other hidden objects. Uneven 

terrain could cause a slip and fall accident.

OVERLOAD PROTECTION DEVICE

The product has an overload protection 

device. When overloading is detected, the 

product will automatically switch off.
If the product stops working, release all handle 

bar switches for a few seconds in battery 

mode of operation or let motor cool down for a 

few minutes in AC mode of operation. Follow 

normal switch on procedure to activate the 

mower again. The motor should again start 

working.
This applies to both AC and Battery mode of 

operation.
If the protection device operates often, raise 

the height of the cut, check the blade is not 

damaged. If it still occurs, bring the product to 

an authorised service centre for investigation.

RESIDUAL RISK

Even when the product is used as prescribed, 

it is still impossible to completely eliminate 

certain residual risk factors. The following 

hazards may arise in use and the operator 

should pay special attention to avoid the 

following: 

■

injury caused by vibration

●

Always use the right tool for the job. Use 

designated handles and restrict working 

time and exposure. 

■

injury caused by noise

●

Exposure to noise can cause hearing 

injury. Wear ear protection and limit 

exposure.

■

injury from contact with the blades

■

injury caused by thrown objects

TRANSPORTATION AND STORAGE

■

Stop the product, remove the isolator key 

and the battery or disconnect from the 

power supply. Make sure that all moving 

parts have come to a complete stop. Allow 

the product to cool down before storing or 

transporting.

■

Clean all foreign material from the product. 

Store it in a cool, dry, and well-ventilated 

place that is inaccessible to children. Keep 

away from corrosive agents such as garden 

chemicals and de-icing salts. Do not store 

outdoors.

■

For transportation, secure the product 

against movement or falling to prevent 

injury to persons or damage to the product.

 WARNING

Use extreme caution when lifting or tilting the 

product for maintenance, cleaning, storage 

or transportation, the blade is sharp, keep 

all body parts away from the blade whilst it 

is exposed.

MAINTENANCE

 WARNING

Use only original manufacturer’s 

replacement parts, accessories and 

attachments. Failure to do so can cause 

injury, poor performance and may void your 

warranty.

4

| English