Makita DLM533Z - Инструкция по эксплуатации - Страница 3

3 ENGLISH

NOTE:

 The declared noise emission value(s) has 

been measured in accordance with a standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared noise emission value(s) 

may also be used in a preliminary assessment of 

exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60335-2-77:

NOTE:

 The values have been measured with the 

mower equipped with the straight mower blade.

Vibration emission (a

h

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

Read all safety warnings and all 

instructions. 

Failure to follow the warnings and instruc-

tions may result in electric shock, fire and/or serious injury.

Save all warnings and instruc-

tions for future reference.

Training

1. 

Read the instructions carefully. Be familiar with 

the controls and the proper use of the mower.

2. 

Never allow children or people unfamiliar with 

these instructions to use the mower. Local 

regulations can restrict the age of the operator.

3. 

Never operate the mower while people, espe-

cially children, or pets are nearby.

4. 

Keep in mind that the operator or user is 

responsible for accidents or hazards occurring 

to other people or their property.

5. 

Children should be supervised to ensure that 

they do not play with the mower.

6. 

Physical condition - Do not operate mower while under 

the influence of drugs, alcohol, or any medication.

Preparation

1. 

While operating the mower, always wear sub-

stantial footwear and long trousers. Do not 

operate the mower when barefoot or wearing 

open sandals. Avoid wearing clothing or jewelry 

that is loose fitting or that has hanging cords or 

ties. They can be caught in moving parts.

2. 

Before use, always visually inspect the mower for 

damaged, missing or misplaced guards or shields.

3. 

Be sure the area is clear of other people before 

mowing. Stop mower if anyone enters the area.

4. 

Do not insert the lock key into mower until it is 

ready to be used.

5. 

Always wear protective goggles to protect your eyes 

from injury when using power tools.The goggles 

must comply with ANSI Z87.1 in the USA, EN 166 in 

Europe, or AS/NZS 1336 in Australia/New Zealand. In 

Australia/New Zealand, it is legally required to wear 

a face shield to protect your face, too.

It is an employer's responsibility to enforce the use of 

appropriate safety protective equipments by the tool oper-

ators and by other persons in the immediate working area.