Makita DLM533Z - Инструкция по эксплуатации - Страница 13

13 ENGLISH

Adjusting the handle height

CAUTION:

Before removing the bolts, hold 

the upper handle firmly.

 Otherwise, the handle may 

fall and cause an injury.

The handle height can be adjusted in two levels.

1.

  Remove the upper bolts of the lower handle using 

box wrench 13, and then loosen the lower bolts.

1

2

►    

1.

 Upper bolt 

2.

 Lower bolt

2.

  Adjust the handle height, and then tighten the 

upper and lower bolts firmly.

Adjusting the traveling speed

1

►    

1.

 Speed lever

The traveling speed can be adjusted with the speed 

lever. To decrease the speed, pull the lever toward you, 

and to increase the speed, turn the lever forward.

Using mulching plug

The mulching plug allows you to return the cut grass to 

the ground without gathering the cut grass in the grass 

basket. When you operate the machine with the mulch-

ing plug, be sure to remove the grass basket.

NOTICE:

When using the machine with the 

mulching plug, make sure that the total length of 

grass is 30 mm or more, or the cut length is 15 

mm or less.

1

2

►    

(1)

 30 mm or more 

(2)

 15 mm or less

Using the rear discharge

Using the rear discharge allows you to discharge the cut 

grass to the ground from the rear side of the machine 

without gathering the cut grass in the grass basket.

When you operate the machine using the rear dis-

charge, be sure to remove the grass basket and mulch-

ing plug, and close the rear cover.

Electronic function

The machine is equipped with the electronic functions 

for easy operation.
• 

Constant speed control of blade rotation

Electronic speed control for obtaining constant 

speed. Possible to get fine finish, because the 

rotating speed is kept constant even under load 

condition.

• 

Soft start at driving

The soft-start function minimizes start-up shock, 

and makes the machine start smoothly.

• 

Electric brake

This machine is equipped with an electric brake. 

If the machine consistently fails to quickly stop 

the mower blades after releasing the switch lever, 

have the machine serviced at Makita Authorized 

Service Center.