Makita DLM533Z - Инструкция по эксплуатации - Страница 11

11 ENGLISH

Indicating the remaining battery 

capacity

Press the check button to indicate the remaining battery 

capacities. The battery indicators correspond to each 

battery.

Battery indicator status

Remaining battery 

capacity

On

Off

50% - 100%

20% - 50%

0% - 20%

NOTE:

 The indicator lamps for remaining battery 

capacity is just for a reference. The actual bat

-

tery capacity may differ depending on the usage 

conditions.

NOTE:

 Before you press the check button to indicate 

the remaining battery capacities, stop the machine.

Switch action

WARNING:

Before installing the battery car-

tridge, always check to see that the switch lever 

actuates properly and returns to the original posi-

tion when released.

 Operating the machine with a 

switch that does not actuate properly can lead to loss 

of control and serious personal injury.

NOTE:

 The mower does not start without pressing the 

switch button even the switch lever is pulled.

NOTE:

 Mower may not start due to the overload 

when you try to mow long or dense grass at a time. 

Increase the mowing height in this case.

This mower is equipped with the lock key and handle 

switch. If you notice anything unusual with either of the 

lock key or switch, stop the operation immediately and 

have them checked by your nearest Makita Authorized 

Service Center.

1.

  Install the battery cartridges. Insert the lock key, 

and then close the battery cover.

2.

  Select the battery cartridges used for operation by 

turning the battery selection switch.

3.

  Press the main power switch.

4.

  Pull the switch lever toward you while holding 

down the switch button. Release the switch button as 

soon as the motor starts running.

1

2

►    

1.

 Switch button 

2.

 Switch lever

NOTE:

 If the lock key is not inserted, the power lamp 

blinks in green when you pull the switch lever.

5.

  While holding the switch lever, push the drive lever 

forward and hold it to drive the rear wheels.

1

►    

1.

 Drive lever

NOTE:

 You can drive the rear wheels by pushing 

the drive lever forward and hold it without pulling the 

switch lever.

6.

  Release the drive lever and the switch lever to 

stop the machine.

Adjusting the mowing height

WARNING:

Never put your hand or leg under 

the mower body when adjusting the mowing 

height.

WARNING:

Always make sure that the lever 

fits in the groove properly before operation.