Greenworks GD82LM51 2502007 - Инструкция по эксплуатации - Страница 20

18

English (Original Instructions)

 WARNING

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact 

with plastic parts. Chemicals can damage, weaken, or 

destroy plastic which may result in serious personal 

injury.

Periodically check all nuts and bolts for proper tightness to 

ensure safe operation of the mower.
Wipe the mower clean with a dry cloth occasionally. Do 

not use water.

LUBRICATION

All of the bearings in this product are lubricated with a 

sufficient amount of high grade lubricant for the life of the 

unit under normal operating conditions. Therefore, no 

further bearing lubrication is required.

 WARNING

Always  protect  hands  by  wearing  heavy  gloves  and/or 

wrapping the cutting edges of the blade with rags and 

other material when performing blade maintenance. 

Contact with the blade could result in serious personal 

injury.

 WARNING

Do not lubricate any of the wheel components. 

Lubrication may cause the wheel components to fail 

during use, which could result in serious personal injury 

to the operator and/or mower or property damage.

REPLACING THE CUTTING BLADE

See figure 11-12.

NOTE:

 Only use authorised replacement blades. Replace 

worn or damaged blades and bolts in sets to preserve balance.

■

Stop the motor and remove the switch key. Allow 

blade to come to a complete stop.

■

Remove the battery pack.

■

Turn the mower on its side.

■

Wedge a block of wood between the blade and mower 

deck to prevent the blade from turning.

■

Loosen the blade bolt by turning it counterclockwise 

(as viewed from bottom of mower) using a 27 mm 

wrench or socket (not provided).

■

Remove the blade bolt and blade.

■

Place the new blade on the shaft. Ensure blade is 

properly seated with shaft going through center blade 

hole and the two blade posts on the fan inserted into 

their respective holes on the blade. Make sure it is 

■

Always be sure of your footing. A slip and fall can 

cause serious personal injury. If you feel you are losing 

your balance, release the power lever immediately.

■

Do not mow near drop-offs, ditches, or embankments; 

you could lose your footing or balance.

EMPTYING THE GRASSBOX

See figure 10.

■

Stop mower, allow blade to completely stop, and 

remove isolator key.

■

Lift the rear door.

■

Lift the grassbox by its handle to remove from mower.

■

Empty grass clippings.

■

Lift the rear door and reinstall the grassbox as 

described earlier in this manual.

MAINTENANCE

 WARNING

Before performing any maintenance, make sure the 

mower battery and isolator key are removed to avoid 

accidental starting and possible serious personal injury.

 WARNING

When servicing, use only authorised replacement parts. 

Use of any other parts may create a hazard or cause 

product damage.

 WARNING

Keep the motor and battery compartments free from 

grass, leaves or excessive grease. This will help reduce 

the risk of fire.

GENERAL MAINTENANCE

Before each use, inspect the entire product for damaged, 

missing, or loose parts such as screws, nuts, bolts, caps, etc.
Tighten securely all fasteners and caps and do not 

operate this product until all missing or damaged parts are 

replaced. Please call Greenworks tools customer service 

for assistance. Avoid using solvents when cleaning 

plastic parts. Most plastics are susceptible to damage 

from various types of commercial solvents and may be 

damaged by their use. Use clean cloths to remove dirt, 

dust, oil, grease, etc.