FERM LMM1013 - Инструкция по эксплуатации - Страница 9

9

EN

breakage of parts and any other condition 
that may affect the power tool’s operation. 
If damaged, have the power tool repaired 
before use. 

Many accidents are caused by 

poorly maintained power tools.

f)  

Keep cutting tools sharp and clean. 

Properly maintained cutting tools with sharp 
cutting edges are less likely to bind and are 
easier to control.

g)  

Use the power tool, accessories and 
tool bits etc. in accordance with these 
instructions, taking into account the 
working conditions and the work to 
be performed. 

Use of the power tool for 

operations different from those intended could 
result in a hazardous situation.

h)

Keep handles and grasping surfaces dry, 
clean and free from oil and grease.

 Slippery 

handles and grasping surfaces do not allow 
for safe handling and control of the tool in 
unexpected situations.

5)   Battery tool use and care

a)  

Recharge only with the charger specified 

by the manufacturer

. 

A charger that is 

suitable for one type of battery pack may 

create a risk of fire when used with another 

battery pack.

b)  

Use power tools only with specifically 

designated battery packs. 

Use of any other 

battery packs may create a risk of injury and 

fire.

c)  

When battery pack is not in use, keep it 
away from other metal objects, like paper 
clips, coins, keys, nails, screws or other 
small metal objects that can make a 
connection from one terminal to another

. 

Shorting the battery terminals together may 

cause burns or a fire.

d)  

Under abusive conditions, liquid may be 
ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 

water. If liquid contacts eyes, additionally 
seek medical help

. 

Liquid ejected from the 

battery may cause irritation or burns.

e)  

Do not use a battery pack or tool that is 

damaged or modified.

Damaged or modified 

batteries may exhibit unpredictable behaviour 

resulting in fire, explosion or risk of injury.

f)  

Do not expose a battery pack or tool to 

fire or excessive temperature.

Exposure to 

fire or temperature above 130 °C may cause 
explosion. NOTE The temperature „130 °C“ 
can be replaced by the temperature „265 °F“.

g)  

Follow all charging instructions and do not 
charge the battery pack or tool outside 

the temperature range specified in the 

instructions.

Charging improperly or at 

temperatures outside the specified range may 

damage the battery and increase the risk of 

fire.

6)   Service

a)  

Have your power tool serviced by a 

qualified repair person using only identical 

replacement parts. 

This will ensure that the 

safety of the power tool is maintained.

b) 

Never service damaged battery packs. 

Service of battery packs should only be 
performed by the manufacturer or authorized 
service providers.

Additional safety instruction for lawn mowers

•   Only use this lawn mower when a Residual 

Current Device (RCD) with a tripping current of 
not more than 30mA is in the circuit.

•   If an extension cord is used make sure it is 

for outdoor use and marked as such. The 
recommended size of extension cord is a 
H05VV-F or H05RN-F type, not lighter than 1.5 
mm² and a maximum of 10 metres in length.

•   Completely uncoil your extension cable before 

use to prevent overheating and loss of mower 
efficiency. When tidying away the cable, wind it 
carefully to avoid kinking.

•   This appliance is not intended for use by 

persons (including children) with reduced 
physical, sensory or mental capabilities, or lack 
of experience and knowledge, unless they have 
been given supervision or instruction concerning 
use of the appliance by a person responsible for 
their safety. Children should be supervised to 
ensure that they do not play with the appliance.

WARNING: 

After switching off the 

machine, the cutting blade continues to 
rotate for a few more seconds.

•   Frequently inspect the condition of the 

cutting blade. Damaged blade must be 
replaced immediately. Follow all the required 
precautions when replacing the blade.