Газонокосилки AL-KO T 18-95.5 HD - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Troubleshooting
469590_a
49
Fault
Possible cause
Rectification
Lawn tractor is vibrating sever-
ely.
Mower mechanism is damaged. Check mower mechanism.
(Customer service workshop)
Lawn tractor does not move off. With hydrostat drive: no travel
drive.
Move bypass lever to operating
position (see "Pushing the lawn
tractor").
Blade worn, blunt.
Renew or regrind blade. Balance
reground blades! (Customer ser-
vice workshop)
Incorrect cutting height.
Correct cutting height.
Engine speed too slow.
Set maximum engine speed.
Driving speed too fast.
Reduce driving speed.
Rough cut.
Different tyre pressure at
wheels.
Inflate to correct air pressure.
Read off correct tyre pressure on
tyre.
Cutting height set too low.
Correct cutting height.
Grass is wet – it is too heavy to
be transported by air stream.
Mow at a later time when lawn
has dried out.
Blade severely worn.
Change blade. (Customer ser-
vice workshop)
Grass in lawn too tall.
Mow in 2 passes
1st pass: max. cutting height
2nd pass: desired cutting height.
Fabric bag blocked – does not
allow air to pass.
Clean fabric bag.
Grass catcher does not fill up.
Discharge channel/mower deck
contaminated.
Clean discharge channel/mower
deck.
Fill level display does not re-
spond.
Mown grass stuck to fill level
display lever.
Remove mown grass from fill le-
vel display lever; check it can
move clearly.
Travel drive, brake, clutch and
mower mechanism.
Only have the check performed
in a customer service work-
shop!
