Газонокосилки AL-KO T 18-95.5 HD - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
The controls
469590_a
37
Driving
direc-
tion
Description
Re-
verse
Press the left pedal (3b) to drive in
reverse.
ADVICE
The mower mechanism is
switched off if just the re-
verse pedal is pressed.
Mowing in reverse:
➯
see the Mowing with the
lawn tractor chapter.
Foot hydrostat transmission
The foot hydrostat transmission is operated by
two pedals (3a and 3b).
To
move off
first release the parking brake (4a)
when the engine is running and then press the pe-
dal (3b) to drive forwards or the pedal (3a) to drive
in reverse. The further you press the pedal, the
faster your speed will be in the selected direction.
Driving forwards
: Press the outer pedal (3b) on
the right side.
Driving in reverse:
Press the inner pedal (3a) on
the right side.
Operation of the mower mechanism
Setting the cutting height
The mower mechanism of the tractor can be set
to various different heights using a lever (5b) on
the right next to the operator's seat.
1. Move the adjusting lever (5b) in the required
direction. When the lever is down, the cutting
height is low; when the lever is up, the cutting
height is high.
Switching on the mower mechanism
Switching on electrically:
There is a switch (1e)
in the area of the dashboard. Use this to switch
the mower mechanism on.
START-UP
WARNING!
Danger if assembly is not carried out
completely!
Do not operate the lawn tractor before it
has been fully assembled!
Carry out all the work described in the as-
sembly instructions. If you are uncertain
about anything, ask a specialist to con-
firm that the assembly has been carried
out correctly before the machine is star-
ted up!
Check all safety and protective devices
are in place and functioning correctly!
Checking the mower mechanism
Before use, always look and check whether the
cutter, fastening pin and the entire mowing unit
are worn or damaged. Worn or damaged blades
must be renewed by new ones in order to avoid
any imbalance.
Oil fill
The engine must be filled with oil before initial
start-up. Please comply with the instructions from
the engine manufacturer in this regard. Also make
sure the oil level is checked at regular intervals
and the oil is topped up if necessary.
Fuel fill
WARNING!
Dangers when handling fuel!
Fuel is highly inflammable. Only fill the
fuel tank outdoors! Do not smoke! Do not
refuel when the engine is running or is
hot!
Use a suitable funnel or a filler pipe when refuel-
ling so that no fuel is spilled on the engine, the
deck or the ground.
For safety reasons, the fuel tank cap and other
tank caps must be renewed if damaged.
Do not start the engine if the fuel has overflowed.
The tractor must be removed from the area con-
taminated by fuel, and the spilled fuel must be ab-
sorbed and wiped away from the ground, the en-
gine and the deck using a cloth.
Do not make any attempt to start the machine until
fuel vapours have evaporated.
Only keep the fuel in containers intended for this
purpose.
Use lead-free petrol, min. RON 91.
