Bosch (0.601.9K0.020) - Инструкция по эксплуатации - Страница 13

English | 

13

u

Do not use a battery pack or tool that is damaged or
modified. 

 Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk
of injury.

u

Do not expose a battery pack or tool to fire or excess-
ive temperature. 

 Exposure to fire or temperature above

130°C may cause explosion.

u

Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. 

Charging improperly or at

temperatures outside the specified range may damage
the battery and increase the risk of fire.

Service

u

Have your power tool serviced by a qualified repair
person using only identical replacement parts. 

This

will ensure that the safety of the power tool is maintained.

u

Never service damaged battery packs. 

 Service of bat-

tery packs should only be performed by the manufacturer
or authorized service providers.

Safety Warnings for Impact Wrenches

u

Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. 

Fasteners contacting a "live"

wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.

u

Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance.

 Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.

u

Hold the power tool securely. 

When tightening and

loosening screws be prepared for temporarily high torque
reactions.

u

Secure the workpiece.

 A workpiece clamped with

clamping devices or in a vice is held more secure than by
hand.

u

Always wait until the power tool has come to a com-
plete stop before placing it down.

 The application tool

can jam and cause you to lose control of the power tool.

u

In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. 

Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The
vapours may irritate the respiratory system.

u

Do not open the battery. 

There is a risk of short-circuit-

ing.

u

The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.

u

Only use the battery in the manufacturer's products.

This is the only way in which you can protect the battery
against dangerous overload.

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.

 There is a risk of explosion and

short-circuiting.

Symbols

The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.

Symbols and their meaning

Tool data logging is enabled in this tool.

Product Description and
Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.

Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.

(1)

Tool holder

(2)

Carrying strap

a)

(3)

Belt clip

a)

(4)

Rechargeable battery

a)

(5)

Battery release button

a)

(6)

"Automatic shutdown (ABR)" button

(7)

"Automatic shutdown (ABR)" LED

(8)

Rotational direction switch

(9)

On/off switch

(10)

"PowerLight" lamp

(11)

Handle (insulated gripping surface)

(12)

Application tool (e.g. impact socket)

a)

a)

Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Bosch Power Tools

1 609 92A 878 | (12.06.2023)