Sony ILME FX-3 - Инструкция по эксплуатации - Страница 12

ILME-FX3
5-025-887-43(1)

GB

12

C:\Users\gotanda\Desktop\01EN-ILMEFX3CEC\01GB.indd
DTP data saved:  2023/04/20  13:34
PDF file created:  2023/04/20  13:35

• While recording is in progress, do not 

change the INPUT1 or INPUT2 switch 

settings.

• If the microphone of the handle is 

in proximity to a speaker, acoustic 

feedback may occur. In this case, move 

the handle away from the speaker to 

allow the maximum distance between 

the microphone and the speaker, or 

lower the speaker volume.

• If dust or water droplets are present 

on the surface of the microphone, 

successful recording may not be 

possible. Be sure to clean the 

microphone surface before using the 

handle.

• Turn off the camera before attaching/

removing the handle.

• When the handle is connected 

to the camera and the 

HANDLE AUDIO ON/OFF switch is set 

to ON, the internal microphone of the 

camera cannot record audio input.

• When attaching the handle to the 

camera, fasten the two handle-

attachment screws securely. Using the 

handle without fastening the handle-

attachment screws may damage the 

Multi Interface Shoe terminal or cause 

the handle to fall off.

Power Cord

For the customers in the UK, Ireland, 

Malta, Cyprus and Saudi Arabia

Use the power cord (A). 
For safety reasons, the power cord (B) is 

not intended for above countries/regions 

and shall therefore not be used there.

For the customers in other EU 

countries/regions

Use the power cord (B).

(A)

(B)

For Customers in the U.S.A.

For question regarding your product or 

for the Sony Service Center nearest you, 

call 1-800-222-SONY (7669) .

Supplier’s Declaration of Conformity

Trade Name : SONY
Model : WW728473
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego, 

CA 92127 U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of 

the FCC rules. Operation is subject 

to the following two conditions: (1) 

This device may not cause harmful 

interference, and (2) this device must 

accept any interference received, 

including interference that may cause 

undesired operation.

Specifications

Camera

[System]

Camera Type: Interchangeable Lens 

Digital Camera

Lens: Sony E-mount lens

[Image sensor]

Image format: 35 mm full frame 

(35.6 mm × 23.8 mm), CMOS image 

sensor

Effective pixel number of camera: 

Approx. 12 100 000 pixels

Total pixel number of camera:  

Approx. 12 900 000 pixels

[Monitor]

7.5 cm (3.0 type) TFT drive, touch 

panel