Ecosoft FK1054CEMIXC - Инструкция по эксплуатации - Страница 27

27

INSTRUCTION MANUAL ECOSOFT

®

 MEDIA SYSTEMS

To proceed, hold   and 

 buttons 

simultaneously for 3 seconds.

Enter hardness of influent water in ppm (parts 

per million CaCO

3

).

If the control valve is equipped with internal 
hard water mixing valve, there will be Service 

Hardness  entry  (hardness  of  the  mixed 
product water) after influent water hardness.

Set Day Override (maximum number of days 
in service, after which control valve will carry 
out preventive regeneration). 14 days is 
recommended.

Set the preferred time of delayed regeneration, 
hours then minutes (factory set to 2 AM).

Press   to exit the menu.

4.5. CT control valve setup

(

FP, FPA, FPC systems

)

After installing and powering up an Ecosoft FP, FPA, or FPC system, enter current time, and 
regeneration options in the 

Installer

 menu of control valve.

Use 

▲ and ▼ buttons to change setting; 

SET

 button to save and go to next step.

To proceed, hold SET and

  ▲  button

s for a few 

seconds until Regeneration time screen shows up.

NORMAL MODE