Ecosoft FK1054CEMIXC - Инструкция по эксплуатации - Страница 22

INSTRUCTION MANUAL ECOSOFT

®

 MEDIA SYSTEMS

22

4. PROGRAMMING

4.1. CE, CI, CE Twin control valve setup

(

FK, FU, FK Twin, FU Twin systems

)

After installing and powering up an Ecosoft FU or FK system, enter display language, water 
hardness, current time, and regeneration options in the 

Installer

 menu of control valve.

Use 

▲ and ▼ buttons to change setting; NEXT button to save and go to next step; CLOCK 

to 

save and exit menu; REGEN to move back one step; 

To  proceed,  hold  NEXT  and  ▲  button

s 

simultaneously for 3 seconds.

Language menu will show up. Select display 
language. This menu entry is only accessible in CE 
valves.

Enter hardness of influent water. Milliequivalent per 

liter is the default hardness unit.

Refer to control valve manual to change to a different 

unit (only accessible in CE valves).

If the control valve is equipped with internal hard 

water  mixing  valve,  there  will  be  Service  Hardness 

entry (hardness of the mixed product water) after 

influent water hardness.

Set Day Override (maximum number of days in 
service, after which control valve will carry out 
preventive regeneration). 14 days is recommended.

Set the preferred time of delayed regeneration, 
hours then minutes (factory set to 2 AM).