Ecosoft FK1054CEMIXC - Инструкция по эксплуатации - Страница 15

15

INSTRUCTION MANUAL ECOSOFT

®

 MEDIA SYSTEMS

5

.  Place  the  brine  tank  beside  the  FRP  tanks.  Install  flexible  tube  in  both  control  valves’ 

brine inlets, join them with a tee connector and run a third piece of flexible tube from the tee 

to the brine tank. Remove tank lid and brine well cap, pull the end of the tube inside and 
connect it to the brine valve, then re-assemble in reverse order. Fill the brine tank with salt.

6

.  Mount the pipe thread elbow adapters to the control valve’s In and Out ports and tighten 

the coupling nuts. Do not put any mechanical load on fittings or use them to support pipes.

Connect both filters to water supply via In ports without turning on the water supply. Connect 

the Out ports to MAV’s A and B ports. Then connect port C of the MAV to the downstream 
pipework. Do not confuse In and Out ports. They are embossed with direction arrows.

Ecosoft DFU Twin/DFK Twin system setup

MOTOR

, 

12VAC

, and 

METER

 cords are not shown but must be plugged in for proper functioning of each 

filter. Both control valves must be programmed for Twin operation as provided in the following section.

TREATED

WATER

OUT

RAW

WATER

IN

PORT C

PORT A

PORT B

LEAD TANK

RESERVE TANK