Einhell PXC GE-LC 18 Li Kit - Инструкция по эксплуатации - Страница 24

GB

- 24 -

Danger! 

 When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be 

found in the enclosed booklet.

Danger! 

Read all safety regulations and instructions.

Any errors made in following the safety regula-

tions and instructions may result in an electric 

shock, 

fi

 re and/or serious injury.

Keep all safety regulations and instructions 

in a safe place for future use.

 Explanation of the symbols on the machine 

(Fig. 28):

1.   Read the operating instructions.

2.   Wear safety goggles.

3.   Wear ear protectors.

4.   Never expose the device to rain.

5.   Maximum cutting length / chain speed vu: 

4.3 m/s

6.   Unlock chain brake before putting into opera-

tion!

7.  Store the battery only in dry rooms with an 

ambient temperature of +10°C to +40°C. 

Place only charged batteries in storage (char-

ged at least 40%).

2.  Layout and items supplied

2.1 Layout (Fig. 1-3)

1.    Claw stop

2.   Front hand guard

3.   Front handle

4.   Rear handle

5.   Safety lock-o

ff

6.   ON/OFF switch

7.   Oil tank cover

8.   Chain wheel cover

9.   Fixing screw for the chain wheel cover

10.  Chain tensioning screw

11.  Chain oil 

fi

 ll level indicator

12.  Battery (in the case of Art. No.: 4501761 it is 

not included in delivery)

13. Pushlock button

14.  Rear hand guard

15.  Cutter bar

16.  Saw chain

17.  Cutter guard

18.  Charger (in the case of Art. No.: 4501761 it is 

not included in delivery)

19. Adapter plate

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

• 

 Open the packaging and take out the equip-

ment with care.

• 

 Remove the packaging material and any 

packaging and/or transportation braces (if 

available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Danger! 

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or su

ff

 ocating!

• 

Original operating instructions

• 

 Safety  instructions 

3. Proper use

 The chainsaw is intended for felling trees and for 

cutting trunks, branches, wooden beams, boards 

etc. and can be used for cross cuts and longitudi-

nal cuts. It is not suitable for cutting any materials 

other than wood.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

Anl_GE_LC_18_Li_Kit_SPK7.indb   24

Anl_GE_LC_18_Li_Kit_SPK7.indb   24

04.04.16   09:28

04.04.16   09:28