Philips HX6921 Sonicare FlexCare+ - Инструкция по эксплуатации - Страница 10

Note: There is a small gap between the colour code ring and the handle.

Charging your Sonicare

 1 

 Put the mains plug of the charger or sanitiser in the wall socket.

 2 

 Place the handle on the charger or sanitiser (Fig. 5).

,

The flashing light of the battery gauge indicates that the toothbrush 

is charging.

 - 1 solid green LED indicates that the toothbrush is 34-66% charged.

 - 2 solid green LEDs indicate that the toothbrush is 67-94% charged.

 - 3 solid green LEDs indicate that the toothbrush is fully charged.

Note: If the battery charge of your Sonicare is low, you hear 3 beeps and  

1 LED of the recharge gauge flashes yellow for 30 seconds after completing 

the brushing cycle.
Note: To keep the battery fully charged at all times, you may keep your Sonicare 

on the charger when not in use. Once the Sonicare is fully charged, the charger 

draws minimal energy from the wall socket.
Note: It takes at least 24 hours to fully charge the battery.

Using the Sonicare

Brushing instructions 

 1 

 Wet the bristles and apply a small amount of toothpaste.

 2 

 Place the toothbrush bristles against the teeth at a slight angle 

towards the gumline (Fig. 6).

 3 

 Press the power on/off button to switch on the Sonicare.

 4 

 Apply light pressure to maximise Sonicare’s effectiveness and let 

the Sonicare toothbrush do the brushing for you. Do not scrub.

 5 

 Gently move the brush head slowly across the teeth in a small back 

and forth motion so the longer bristles reach between your teeth. 

Continue this motion throughout your brushing cycle.

Note: To make sure you brush evenly throughout the mouth, divide your 

mouth into 4 sections using the Quadpacer feature (see chapter ‘Features’).

ENGLISH

10