Philips HX6921 Sonicare FlexCare+ - Инструкция по эксплуатации - Страница 14

Sanitising (specific types only)

 - With the UV sanitiser you can clean your brush head after ever y use  

(Fig. 13).

Discontinue use of the sanitiser if the UV light bulb remains on when 

the door is open or if the blue window is broken or missing from the 

sanitiser. UV light can be harmful to the human eye and skin.  

This appliance should be kept out of reach of children at all times.
Unplug the sanitiser and call Consumer Care if the sanitiser gives off 

smoke or a burning smell while it is operating.

 1 

 After brushing, rinse the brush head and shake off excess water.

Do not place the travel cap on the brush head during sanitisation.

 2 

 Place your finger in the door recess on top of the sanitiser and pull 

open the door (Fig. 14).

 3 

 Place the brush head on one of the 2 pegs in the sanitiser.  (Fig. 15)

 - Make sure the bristles of the brush head directly face the light bulb.

Note: Only clean Sonicare ProResults brush heads in the sanitiser.

 4 

 Make sure the sanitiser is plugged into the wall socket.

 5 

 Close the door and press the green power on/off button once to 

select the UV clean cycle.

Note: You can only switch on the sanitiser if the door is properly closed.
Note: The sanitiser stops if you open the door during the sanitising cycle.
Note: The sanitiser cycle runs for 10 minutes and then automatically switches off.

,

The sanitiser is in operation when the blue light glows through  

the window.

,

When the sanitising cycle is complete, the sanitiser automatically 

switches off. 

ENGLISH

14