KitchenAid KOHCP 60600 - Инструкция по эксплуатации - Страница 11

11

Cleaning

•  If the oven is installed below a hob, ensure that 

all burners or electric hotplates are switched 

off during the self-cleaning (pyrolysis) function

•  Remove all accessories before running the 

pyrolysis function (including the lateral grids).

•  For optimum cleaning of the oven door, 

remove the worst soiling with a damp sponge 

before using the pyrolytic function.

The appliance is equipped with 2 pyrolysis 

functions:

1.  Energy-saving cycle (PYRO EXPRESS/ECO): 

which consumes approximately 25 % less 

energy than the standard cycle. Select it at 

regular intervals (after cooking meat on 2 or 3 

consecutive occasions).

2.  Standard cycle (PYRO): which is suitable for 

cleaning a very dirty oven.

•  In any case, after a certain number of uses 

and depending on how dirty the oven is, a 

message on the oven display advises you 

to run a self-cleaning cycle.

N.B: during the pyrolysis function, the oven 

door will not open; it will remain locked until 

the temperature inside the oven has returned 

to an acceptably safe level.

–

Use protective gloves.

–

Ensure that the oven is cold before carrying out the following 

operations.

–

Disconnect the appliance from the mains power supply.

WARNING

REMOVING THE DOOR

To remove the door:

1.  Open the door fully.

2.  Lift the catches and push them forwards as far as they will go (fig. 

1

).

3.  Close the door as far as it will go (

A

), lift it up (

B

) and turn it (

C

) until it is 

released (

D

) (fig. 

2

).

To refit the door:

1.  Insert the hinges in their seats.

2.  Open the door fully.

3.  Lower the two catches.

4.  Close the door.

Fig. 

1

Fig. 

2

Maintenance