Fulgor Milano FCO 4512 TM BK - Инструкция по эксплуатации - Страница 53

EN

13

6 - General Oven Information

Before using your oven for the first time remove all packing and foreign materials from the oven(s). Any material of this sort left inside may melt or 
burn when the appliance is used.

Error codes

This code appears in the event of the electronic control indicating a 
fault. When the error appears, the current function is blocked. If the type 
of error is related to a safety function, the oven becomes unusable and 
every time a start attempt is made, the same error appears (in which 
case call in the after-sales service), while if the error relates to a minor 
fault, after being restarted the oven can be used for the functions that do 
not involve the faulty part (e.g., a heating element).

Beeps

Confirms that the command has been received after a key has been 
pressed.
It also indicates that a time function has been completed (e.g. Timer or 
Timed Cooking). During the execution of a recipe, an acoustic signal 
warns the user that the oven is waiting for operation by the user (e.g., 
insert the dish or turn it over).
Beeps also signal an oven fault.

Default Settings

The cooking modes automatically select a suitable temperature when 
the cooking mode is selected, these can be changed when a different 
one is needed.

F Failure Number Codes

These codes are displayed when the electronic control detects a 
problem in the oven or in the electronics.
The error code is recorded in the Error Log in the Setup menu. This 
error can be communicated to the service technician so he/she can 
understand the possible cause of the problem in advance.

Preheat and Fast Preheat

Whenever a cooking mode is set and the oven is heating, the preheating 
starts, during this period, the instantaneous temperature is displayed 
together with the thermometer icon.
As soon as the 100% is reached, the control sounds an “end of preheat” 
tone and the current temperature value disappears.
When it’s necessary to heat up the oven rapidly, a Fast Preheat mode 
is available: it uses the heating elements and the convection fan in a 
special way, in order to reduce the heating time as long as possible.
After having set one of the cooking functions for which the fast preheat 
is available and set the desired temperature value touch the   key, 
after entering the functions menu, select the icon   by means of the 
keys     and confirm by means of the key  .
As soon as the set-point temperature is reached, the control sounds a 
and both “Fast Preheat Icon” and “current temperature” disappear. 
The oven switches automatically to the desired cooking mode that was 
previously set: put the food inside now.

Timer

WARNING

The timer on your oven does not turn the appliance on or off, its only 
purpose is to alert you through the buzzer. When you want to turn off 
the oven automatically, use the end-of-cooking or delayed cooking 
function.

NOTE  Pressing the OFF button does not reset or stop the timer.

1.  Press the button   and set the desired time using the arrows     

and confirm with the button   . To switch the selection between 
hours and minutes use the arrows    .

2.  The time can be set from 1 minute to 12 hours and 59 minutes and, 

when set, the remaining time is always visible in the bottom status 
bar until the time expires or is reset.

3.  To change or cancel the time set, you must reset the timer by 

pressing and holding the button   for a few seconds.

4.  Timer format is usually HR:MIN, switching into MIN:SEC during the 

last minute.

5.  When the time expires, the display shows 00:00 and the buzzer 

will sound for one minute or until the button   is pressed.