Franke FSM 86 H XS - Инструкция по эксплуатации - Страница 6

6

1.

 SETTING THE TIME

You will need to set the time of the day when you 

switch on the appliance for the first time: “AUTO” and 

“0�00” flash on the display�

A

U

T

O

To set the time of day, press buttons   and   at the 

same time: Set the time of day using the   and    

buttons�

Press the 

time button

 to confirm�

Having selected the desired time value, it is possible 

to change the alarm tone: the display shows “ton 1”�

A

U

T

O

To select the desired tone, press button   , then press 

the 

time button

 to confirm�

Please note: To change the time of the day afterwards for 

example following lengthy power outages, proceed as 

described above.

2.

 HEAT THE OVEN

A new oven may release odours that have been left 

behind during manufacturing: this is completely 

normal� 

Before starting to cook food, we therefore 

recommend heating the oven with it empty in order 

to remove any possible odours� 
Remove any protective cardboard or transparent film 

from the oven and remove any accessories from inside it�
Heat the oven to 250° C for about one hour, 

preferably using the “Convection bake” function� The 

oven must be empty during this time� 

Follow the instructions for setting the function 

correctly�

Notes: It is advisable to air the room after using the appliance 

for the first time. 

FIRST TIME USE

1.

 SELECT A FUNCTION

To select a function, turn the 

selection knob 

to the 

symbol for the function you require�

2.

 ACTIVATE A FUNCTION

MANUAL

To start the function you have selected, turn the 

thermostat knob

 to set the temperature you require�

To interrupt the function at any time, switch off the 

oven, turn the 

selection knob

 and the 

thermostat knob

to  �
STEAM CLEANING

To activate the “Steam Cleaning” cleaning function, 

pour 200 ml of drinking water into the bottom of the 

oven, then turn the 

selection knob

 and the 

thermostat 

knob

 to the   icon�

It is best to use the function for 35’�

3.

 PREHEATING

Once the function has been activated, the LED 

thermostat will switch on signalling that the 

preheating process has begun�

At the end of this process, the LED thermostat 

switches off indicating that the oven has reached the 

set temperature: At this point, place the food inside 

and proceed with cooking� 

Please note: Placing the food in the oven before preheating 

has finished may have an adverse effect on the final cooking 

result.

. USING THE ELECTRONIC PROGRAMMER

By pressing the 

time button

 it is possible to select 

various mode to keep or program the cooking time�

Please note: After few seconds without any interaction, a 

buzzer sounds and all settings will be confirmed.

1�  Button – : to decrease the value shown on the 

display

2�   Button   : for selecting the various settings

3�  Button +: to increase the value shown on the 

display

A.

  The symbol   indicates that the timer function is in 

operation

B.

   The 

AUTO

 symbol confirms the setting has been 

made

A

U

T

O

2

3

1

A

B

. PROGRAMMING COOKING

After selecting and activating the function, it is 

possible to set the duration�
DURATION 

Press for at least 2 seconds the 

time button

: the   

symbol flashes�

DAILY USE