Bosch HBJ538ES0M - Инструкция по эксплуатации - Страница 13

Cleaning assistant for wet-cleaning

 en

13

ing or grilling and break them down. If the self-cleaning
surfaces no longer clean sufficiently during operation,
heat up the cooking compartment specifically.

ATTENTION!

If the self-cleaning surfaces are not cleaned regularly,
the surfaces may be damaged.

▶

If dark spots can be seen on the self-cleaning sur-
faces, heat up the cooking compartment.

▶

Do no use any oven cleaners or abrasive cleaning
aids. If oven cleaner accidentally comes into contact
with the self-cleaning surfaces, dab the surfaces im-
mediately with water and a sponge cloth. Do not rub
them.

1.

Remove accessories and cookware from the cook-
ing compartment.

2.

Detach the shelf supports and remove them from
the cooking compartment.

→ 

"Rails", Page 14

3.

Remove coarse dirt using soapy water and a soft
cloth:

– From the smooth enamel surfaces
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stubborn stains.

4.

Remove any items from the cooking compartment.
The cooking compartment must be empty.

5.

Use the function selector to set 

3D hot air

.

6.

Use the temperature selector to set the temperature.

a

The appliance starts heating after a few seconds.

7.

Switch off the appliance after one hour.

8.

Once the appliance has cooled down, wipe the
cooking compartment with a damp cloth.

Note: 

Reddish marks may appear on the self-clean-

ing surfaces. This is not corrosion but rather residue
from food that contains salt. Food ingredients such
as sugar and egg white are not removed from the
surface coating and may stick to the surface. These
spots are not harmful and do not impair the clean-
ing ability of the self-cleaning surfaces.

9.

Attach the shelf supports. 

→ 

"Rails", Page 14

12  Cleaning assistant for wet-cleaning

The cleaning assistant is a fast alternative for occasion-
ally cleaning the cooking compartment. The cleaning
assistant softens dirt by evaporating soapy water. This
means that dirt can be removed more easily.

12.1 Setting the cleaning assistant

WARNING ‒ Risk of scalding!

If there is water in the cooking compartment when it is
hot, this may create hot steam.

▶

Never pour water into the cooking compartment
when the cooking compartment is hot.

Requirement:

 The cooking compartment must be

cooled down completely.

1.

Remove the accessories from the cooking compart-
ment.

2.

Add one drop of detergent to 0.4 l water and pour it
onto the centre of the cooking compartment floor.
Do not use distilled water.

3.

Use the function and temperature selector to set the

 function.

a

After a few seconds, the appliance starts heating
and the duration counts down.

a

When the cooking time has counted down, a signal
sounds and the duration is at zero in the display.

4.

Note: 

The duration is preset and cannot be

changed.
The end time cannot be delayed.

If the cooking compartment is not completely
cooled down,   flashes in the display panel.

12.2 Cleaning the cooking compartment
after using it

ATTENTION!

If the cooking compartment remains damp for too long,
this results in corrosion.

▶

After using the cleaning aid, wipe the cooking com-
partment and allow it to dry completely.

Requirement:

 The cooking compartment has cooled

down.

1.

Open the appliance door and absorb the residual
water with an absorbent sponge cloth.

2.

Clean smooth surfaces in the cooking compartment
with a dish cloth or a soft brush. Remove stubborn
residues with a stainless steel spiral scourer.

3.

Remove limescale deposits using a vinegar-soaked
cloth. Wipe this away with clear water and use a soft
cloth to also rub underneath the door seal dry.

4.

Once the cooking compartment is sufficiently clean:

‒

In order to cool the cooking compartment, leave
the appliance door open in the detent position
for approx. one hour.

‒

To dry the cooking compartment more quickly,
heat up the appliance with the door open with 

3D

hot air

   and 50 °C for approx. five minutes.