Einhell TC-ID 720/1 E - Инструкция по эксплуатации - Страница 17

GB

- 17 -

L

pA

 sound pressure level  ..................... 87.5 dB(A)

K

pA

 uncertainty  ............................................. 3 dB

L

WA

 sound power level   ....................... 98.5 dB(A)

K

WA

 uncertainty ............................................. 3 dB

Wear ear-mu

ff

 s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

 Hammer drilling in concrete

Vibration emission value a

h, ID

 = 9.1 m/s

2

K uncertainty = 1.5 m/s

2

 Drilling in metal

Vibration emission value a

h, I

 = 8.6 m/s

2

K uncertainty = 1.5 m/s

2

The speci

fi

 ed vibration value was established in 

accordance with a standardized testing method. It 

may change according to how the electric equip-

ment is used and may exceed the speci

fi

 ed value 

in exceptional circumstances.

The speci

fi

 ed vibration value can be used to 

compare the equipment with other electric power 

tools.

The speci

fi

 ed vibration value can be used for initi-

al assessment of a harmful e

ff

 ect.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

3.   Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

5.  Before starting the equipment

Before you connect the equipment to the mains 

supply make sure that the data on the rating plate 

are identical to the mains data.

Warning! 

Always pull the power plug before making 

adjustments to the equipment.

 5.1. Fitting the additional handle 

(Fig. 2-3/Item 8)

The additional handle (8) enables you to achieve 

better stability whilst using the hammer drill. Do 

not use the tool without the additional handle.

The additional handle (8) is secured to the ham-

mer drill by a clamp. During the handle clockwise 

tightens this clamp. Turning it anti-clockwise will 

release the clamp.

• 

 The supplied additional handle (8) must 

first be fitted. To do this, the clamp must be 

opened by turning the handle until it is wide 

enough for the additional handle to be slid 

over the chuck (1) and on to the hammer drill.

• 

 After you have positioned the additional 

handle (8), turn it to the most comfortable 

working position for you.

• 

 Now turn the handle in the opposite direction 

again until the additional handle is secure.

• 

 The additional handle (8) is suitable for both 

left-handed and right-handed users.

5.2  Fitting and adjusting the depth stop (Fig. 

4/Item 2)

The depth stop (2) is held in place by the additi-

onal handle (8) by clamping. The clamp can be 

released and tightened by turning the handle.

• 

 Release the clamp and fit the depth stop (2) 

in the recess provided for it in the additional 

handle.

• 

 Set the depth stop (2) to the same level as 

the drill bit.

• 

 Pull the depth stop back by the required dril-

ling depth.

• 

 Turn the handle on the additional handle (8) 

until it is secure.

• 

 Now drill the hole until the depth stop (2) tou-

Anleitung_TC_ID_720_1_E_SPK9.indb   17

Anleitung_TC_ID_720_1_E_SPK9.indb   17

31.01.2019   14:17:09

31.01.2019   14:17:09