Einhell TC-ID 720/1 E - Инструкция по эксплуатации - Страница 16

GB

- 16 -

Danger!

 When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be 

found in the enclosed booklet.

Danger!

Read all safety regulations and instructions.

Any errors made in following the safety regula-

tions and instructions may result in an electric 

shock, 

fi

 re and/or serious injury.

Keep all safety regulations and instructions 

in a safe place for future use.

2.  Layout and items supplied

2.1 Layout (Fig. 1)

1.    Keyless chuck

2.   Drill depth stop

3.   Drill/hammer drill selector switch

4.   Locking button

5.   ON/OFF switch

6.   Speed controller

7.   Clockwise/Counter-clockwise switch

8.   Additional handle

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

• 

 Open the packaging and take out the equip-

ment with care.

• 

 Remove the packaging material and any 

packaging and/or transportation braces (if 

available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or su

ff

 ocating!

• 

 Hammer  drill

• 

 Drill depth stop

• 

Original operating instructions

• 

 Safety  instructions 

3. Proper use

The impact drill is designed for drilling holes into 

wood, iron and non-ferrous metals, and for impact 

drilling in stone, using the appropriate bits.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

4. Technical data

 Mains voltage:  ........................ 220-240 V ~ 50 Hz
Power input:  .............................................. 720 W
Idling speed: .....................................0-2800 min

-1

Drilling capacity ......................... Concrete 13 mm

......................................................... Steel 10 mm

........................................................ Wood 30 mm
Protection class:  ............................................ II/

쓑

Weight:  .......................................................1.8 kg

Danger!

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 60745.

Anleitung_TC_ID_720_1_E_SPK9.indb   16

Anleitung_TC_ID_720_1_E_SPK9.indb   16

31.01.2019   14:17:09

31.01.2019   14:17:09