Britech BT 46/40 CS - Инструкция по эксплуатации - Страница 38

38

CHAIN SAW OPERATING MANUAL

GB

9)

Using the palm of your hand, press the throttle

trigger lock-out (fig. 30 part. 1) and then press
the throttle trigger (fig. 30 part 2); this way 

“THE

THROTTLE ADVANCEMENT”

 will disengage

and the engine will run at minimum speed.

10)

Do not use the chainsaw if the chain

moves at the minimum engine setting.

Instead, apply to a service centre for assistance.

11) 

Do not move or transport the

chainsaw with the engine running. Dur-

ing transport, cover the bar with the protector
provided.

 STOPPING THE ENGINE

1)

 To stop the engine, lower the switch lever to the

“

STOP

       “ position (Fig.26 part. 1)

2)

 After working for a long period at full power, it is

best to leave the engine to run at minimum speed for
a few seconds before operating the 

“STOP     “

switch.

ATTENTION!

 Accustom yourself to oper-

ating the 

STOP

 switch so that you will be

able to act promptly in the event of an emergency.

ATTENTION!

 The chain continues to

move for a certain time after the throttle

trigger has been released.

STARTING WITH THE ENGINE HOT
1)

Raise the switch lever (Fig.26 part.1).

2)

 Pull the air knob as far as it will go and then push

it in to engage 

“THROTTLE ADVANCEMENT”.

3)

 Give the starter cord handle a strong pull until the

engine starts fig. 29.

STARTING WITH THE ENGINE HOT AFTER
REFUELLING
1)

If the fuel tank has been emptied completely,

after refuelling follow the instructions given for

“STARTING WITH THE ENGINE COLD “.

ENGINE STOPPED. The engine must ALWAYS
be off while the following operations are
being performed.
#

Refuelling

#

 Topping up the chain oil

#

Making checks and repairs

#

Cleaning and making adjustments

#

Moving from one place to another at the work

site

#

Transport

8. USE

- Always hold the equipment firmly with both
hands (Fig. 11).
- Comply with all the rules described in the
previous section “SAFETY”.
- Cut with the throttle trigger pressed to the
maximum and make contact with the wood
when the engine has reached full speed.

8.1  FELLING

The operation of TREE FELLING re-
quires professionally trained and

qualified personnel.
Reading of these instructions is always nec-
essary, but is not a substitute for adequate
experience in performing this delicate opera-
tion.

- Before felling. Ensure that:
1)

There are no other people or animals within the

range of the fallen tree.

ENGLISH

è

è