Novex DP 6520 C - Инструкция по эксплуатации - Страница 14

14

7. REPLACING THE BULB

Always switch off the electrical 

supply before carrying out any 
operation
LED bulb does not operate is 
possible to remove as shown in

Figure 12
A new bulb to be supplied from 

service points is replaced with 
the same reoperation.
Cables are designed with 
sockets. The plug in should 
be made according to previous 
connection.

Note:

 Remove the holder on the LED bulb as shown in 

Figure 12.2. Put 

the new LED bulb on the holder housing of the LED bulb you removed as 
shown in 

Figure 12.1

.

8. MAINTENANCE OF THE CHIMNEY HOOD

•  Device should be unplugged or switch should be turned off before 

cleaning and maintenance procedures.

• 

Metal filter should be cleaned once a month with hot soapy water or 

in the dishwasher, if possible. (60 °C)

• 

Remove  the  aluminum  cartridge  filter  by  pressing  on  the  spring 
catches on the side. Do not refit before drying after wash.

• 

Outer  surface  of  the  extractor  hood  should  be  wiped  with  a  damp 

cloth soaked with soapy water.

• 

Make  sure  electronic  parts  do  not  contact  with  water  or  similar 

materials.

• 

For  inox  products,  using  inox  cleaning  and  maintenance  products 

available in the market will provide longer usage life for your device.

• 

Aluminum filters can be washed in dishwasher. After several washes, 
aluminum filters may change colour. This is normal and filters do not 

need to be replaced.

1

2

Red

Black

Figure 12

GB